Thanx,
--WjW
-------- Forwarded Message --------
Subject: Build failed in Jenkins: ceph-master #1732
Date: Thu, 1 Feb 2018 08:48:11 +0100 (CET)
From: jenkins@xxxxxxxxxxx
Reply-To: jenkins@xxxxxxxxxxx
To: wjw@xxxxxxxxxxx
See
<http://cephdev.digiware.nl:8180/jenkins/job/ceph-master/1732/display/redirect?page=changes>
Changes:
[dillaman] osd/OSDMap: expose require_min_compat_client variable
[dillaman] librados: getter for min compatible client versions
[xie.xingguo] mgr/balancer: pool-specific optimization support
[ncutler] build/ops: rpm: fix _defined_if_python2_absent conditional
[cbodley] test/log: add failing unit test for reuse of bad stream
[xie.xingguo] pybind/mgr/balancer: re-initialize everything on
instantiating a new
[tone.zhang] cmake: fix libcephfs-test.jar build failure
[xie.xingguo] pybind/mgr/balancer: do not dirty compat_ws on error out
[xie.xingguo] pybind/mgr/balancer: fix sanity check against minimal pg
numbers per
[guzhongyan] common/pick_address: wrong prefix_len in pick_iface()
With prefix_len
[kchai] crushtool: add --add-bucket
[kchai] crushtool: add --move
[kchai] crush/CrushWrapper: lower log level of check_item_loc()
[kchai] test/cli/crushtool: add test for --add-bucket and --move
[cbodley] log: clear thread-local stream's ios flags on reuse
------------------------------------------
[...truncated 3.67 MB...]
Start 125: unittest_osd_types
Start 126: unittest_ecbackend
111/145 Test #125: unittest_osd_types ...................... Passed
1.37 sec
Start 127: unittest_osdscrub
112/145 Test #126: unittest_ecbackend ...................... Passed
3.97 sec
Start 128: unittest_pglog
113/145 Test #127: unittest_osdscrub ....................... Passed
4.22 sec
Start 129: unittest_hitset
114/145 Test #129: unittest_hitset ......................... Passed
1.38 sec
Start 130: unittest_osd_osdcap
115/145 Test #130: unittest_osd_osdcap ..................... Passed
2.94 sec
Start 131: unittest_extent_cache
116/145 Test #131: unittest_extent_cache ................... Passed
1.38 sec
117/145 Test #105: unittest_erasure_code_shec_thread ....... Passed
62.12 sec
Start 132: unittest_pg_transaction
Start 133: unittest_ec_transaction
118/145 Test #133: unittest_ec_transaction ................. Passed
1.13 sec
119/145 Test #132: unittest_pg_transaction ................. Passed
1.34 sec
Start 134: unittest_mclock_op_class_queue
Start 135: unittest_mclock_client_queue
120/145 Test #7: unittest_bufferlist.sh .................. Passed
115.11 sec
121/145 Test #128: unittest_pglog .......................... Passed
12.17 sec
Start 136: test_ceph_daemon.py
Start 137: test_ceph_argparse.py
122/145 Test #6: smoke.sh ................................***Failed
117.17 sec
123/145 Test #136: test_ceph_daemon.py ..................... Passed
1.33 sec
Start 138: unittest_rgw_bencode
Start 139: unittest_rgw_period_history
124/145 Test #139: unittest_rgw_period_history ............. Passed
0.41 sec
125/145 Test #25: unittest_bufferlist ..................... Passed
114.27 sec
126/145 Test #138: unittest_rgw_bencode .................... Passed
0.52 sec
127/145 Test #135: unittest_mclock_client_queue ............ Passed
5.26 sec
Start 140: unittest_rgw_compression
Start 141: unittest_http_manager
Start 142: unittest_rgw_crypto
Start 143: unittest_rgw_iam_policy
128/145 Test #141: unittest_http_manager ................... Passed
0.73 sec
129/145 Test #134: unittest_mclock_op_class_queue .......... Passed
8.10 sec
Start 144: unittest_rgw_string
Start 145: unittest_rbd_mirror
130/145 Test #143: unittest_rgw_iam_policy ................. Passed
2.59 sec
131/145 Test #144: unittest_rgw_string ..................... Passed
2.09 sec
132/145 Test #142: unittest_rgw_crypto ..................... Passed
5.68 sec
133/145 Test #4: test_objectstore_memstore.sh ............ Passed
131.79 sec
134/145 Test #140: unittest_rgw_compression ................ Passed
12.66 sec
135/145 Test #137: test_ceph_argparse.py ................... Passed
68.73 sec
136/145 Test #145: unittest_rbd_mirror ..................... Passed
142.61 sec
137/145 Test #117: ceph_test_object_map .................... Passed
209.75 sec
138/145 Test #3: run-cli-tests ........................... Passed
283.66 sec
139/145 Test #91: check-generated.sh ...................... Passed
313.51 sec
140/145 Test #2: rbd-ggate.sh ............................ Passed
486.54 sec
141/145 Test #92: readable.sh ............................. Passed
481.21 sec
142/145 Test #123: safe-to-destroy.sh ...................... Passed
491.42 sec
143/145 Test #8: run-tox-ceph-disk ....................... Passed
625.87 sec
144/145 Test #104: unittest_erasure_code_shec_all .......... Passed
612.66 sec
145/145 Test #1: run-rbd-unit-tests.sh ................... Passed
832.62 sec
99% tests passed, 2 tests failed out of 145
Total Test time (real) = 833.07 sec
The following tests FAILED:
6 - smoke.sh (Failed)
17 - unittest_log (SEGFAULT)
Errors while running CTest
+ RETEST=1
echo "Testing result, retest: = " $RETEST
+ echo 'Testing result, retest: = ' 1
Testing result, retest: = 1
if [ $RETEST -eq 1 ]; then
# make sure no leftovers are there
killall ceph-osd || true
killall ceph-mgr || true
killall ceph-mds || true
killall ceph-mon || true
rm -rf td/* src/test/td/* || true
ctest --output-on-failure --rerun-failed
fi
+ [ 1 -eq 1 ]
+ killall ceph-osd
No matching processes belonging to you were found
+ true
+ killall ceph-mgr
No matching processes belonging to you were found
+ true
+ killall ceph-mds
No matching processes belonging to you were found
+ true
+ killall ceph-mon
No matching processes belonging to you were found
+ true
+ rm -rf 'td/*' 'src/test/td/*'
+ ctest --output-on-failure --rerun-failed
Test project /home/jenkins/workspace/ceph-master/build
Start 6: smoke.sh
1/2 Test #6: smoke.sh ......................... Passed 156.86 sec
Start 17: unittest_log
2/2 Test #17: unittest_log .....................***Exception: SegFault
0.36 sec
2018-02-01 08:48:08.309 800ae1000 -1 did not load config file, using
default settings.
2018-02-01 08:48:08.309 800ae1000 -1 Errors while parsing config file!
2018-02-01 08:48:08.309 800ae1000 -1 parse_file: cannot open
/etc/ceph/ceph.conf: (2) No such file or directory
2018-02-01 08:48:08.309 800ae1000 -1 parse_file: cannot open
~/.ceph/ceph.conf: (2) No such file or directory
2018-02-01 08:48:08.309 800ae1000 -1 parse_file: cannot open
ceph.conf: (2) No such file or directory
2018-02-01 08:48:08.309 800ae1000 -1 parse_file: cannot open
/usr/local/etc/ceph/ceph.conf: (2) No such file or directory
2018-02-01 08:48:08.319 800ae1000 -1 Errors while parsing config file!
2018-02-01 08:48:08.319 800ae1000 -1 parse_file: cannot open
/etc/ceph/ceph.conf: (2) No such file or directory
2018-02-01 08:48:08.319 800ae1000 -1 parse_file: cannot open
~/.ceph/ceph.conf: (2) No such file or directory
2018-02-01 08:48:08.319 800ae1000 -1 parse_file: cannot open
ceph.conf: (2) No such file or directory
2018-02-01 08:48:08.319 800ae1000 -1 parse_file: cannot open
/usr/local/etc/ceph/ceph.conf: (2) No such file or directory
[==========] Running 15 tests from 1 test case.
[----------] Global test environment set-up.
[----------] 15 tests from Log
[ RUN ] Log.Simple
[ OK ] Log.Simple (1 ms)
[ RUN ] Log.ReuseBad
*** Caught signal (Segmentation fault) **
in thread 800ae1000 thread_name:
ceph version Development (no_version) mimic (dev)
1: <ceph::BackTrace::BackTrace(int)+0x6c> at
/home/jenkins/workspace/ceph-master/build/bin/unittest_log
2: <handle_fatal_signal(int)+0xcf> at
/home/jenkins/workspace/ceph-master/build/bin/unittest_log
3: <pthread_sigmask()+0x536> at /lib/libthr.so.3
2018-02-01 08:48:08.339 800ae1000 -1 *** Caught signal (Segmentation
fault) **
in thread 800ae1000 thread_name:
ceph version Development (no_version) mimic (dev)
1: <ceph::BackTrace::BackTrace(int)+0x6c> at
/home/jenkins/workspace/ceph-master/build/bin/unittest_log
2: <handle_fatal_signal(int)+0xcf> at
/home/jenkins/workspace/ceph-master/build/bin/unittest_log
3: <pthread_sigmask()+0x536> at /lib/libthr.so.3
NOTE: a copy of the executable, or `objdump -rdS <executable>` is
needed to interpret this.
--- begin dump of recent events ---
-30> 2018-02-01 08:48:08.309 800ae1000 5 asok(0x800d41000)
register_command perfcounters_dump hook 0x800afe250
-29> 2018-02-01 08:48:08.309 800ae1000 5 asok(0x800d41000)
register_command 1 hook 0x800afe250
-28> 2018-02-01 08:48:08.309 800ae1000 5 asok(0x800d41000)
register_command perf dump hook 0x800afe250
-27> 2018-02-01 08:48:08.309 800ae1000 5 asok(0x800d41000)
register_command perfcounters_schema hook 0x800afe250
-26> 2018-02-01 08:48:08.309 800ae1000 5 asok(0x800d41000)
register_command perf histogram dump hook 0x800afe250
-25> 2018-02-01 08:48:08.309 800ae1000 5 asok(0x800d41000)
register_command 2 hook 0x800afe250
-24> 2018-02-01 08:48:08.309 800ae1000 5 asok(0x800d41000)
register_command perf schema hook 0x800afe250
-23> 2018-02-01 08:48:08.309 800ae1000 5 asok(0x800d41000)
register_command perf histogram schema hook 0x800afe250
-22> 2018-02-01 08:48:08.309 800ae1000 5 asok(0x800d41000)
register_command perf reset hook 0x800afe250
-21> 2018-02-01 08:48:08.309 800ae1000 5 asok(0x800d41000)
register_command config show hook 0x800afe250
-20> 2018-02-01 08:48:08.309 800ae1000 5 asok(0x800d41000)
register_command config help hook 0x800afe250
-19> 2018-02-01 08:48:08.309 800ae1000 5 asok(0x800d41000)
register_command config set hook 0x800afe250
-18> 2018-02-01 08:48:08.309 800ae1000 5 asok(0x800d41000)
register_command config get hook 0x800afe250
-17> 2018-02-01 08:48:08.309 800ae1000 5 asok(0x800d41000)
register_command config diff hook 0x800afe250
-16> 2018-02-01 08:48:08.309 800ae1000 5 asok(0x800d41000)
register_command config diff get hook 0x800afe250
-15> 2018-02-01 08:48:08.309 800ae1000 5 asok(0x800d41000)
register_command log flush hook 0x800afe250
-14> 2018-02-01 08:48:08.309 800ae1000 5 asok(0x800d41000)
register_command log dump hook 0x800afe250
-13> 2018-02-01 08:48:08.309 800ae1000 5 asok(0x800d41000)
register_command log reopen hook 0x800afe250
-12> 2018-02-01 08:48:08.309 800ae1000 5 asok(0x800d41000)
register_command dump_mempools hook 0x800da4488
-11> 2018-02-01 08:48:08.309 800ae1000 -1 did not load config file,
using default settings.
-10> 2018-02-01 08:48:08.309 800ae1000 -1 Errors while parsing
config file!
-9> 2018-02-01 08:48:08.309 800ae1000 -1 parse_file: cannot open
/etc/ceph/ceph.conf: (2) No such file or directory
-8> 2018-02-01 08:48:08.309 800ae1000 -1 parse_file: cannot open
~/.ceph/ceph.conf: (2) No such file or directory
-7> 2018-02-01 08:48:08.309 800ae1000 -1 parse_file: cannot open
ceph.conf: (2) No such file or directory
-6> 2018-02-01 08:48:08.309 800ae1000 -1 parse_file: cannot open
/usr/local/etc/ceph/ceph.conf: (2) No such file or directory
-5> 2018-02-01 08:48:08.319 800ae1000 -1 Errors while parsing
config file!
-4> 2018-02-01 08:48:08.319 800ae1000 -1 parse_file: cannot open
/etc/ceph/ceph.conf: (2) No such file or directory
-3> 2018-02-01 08:48:08.319 800ae1000 -1 parse_file: cannot open
~/.ceph/ceph.conf: (2) No such file or directory
-2> 2018-02-01 08:48:08.319 800ae1000 -1 parse_file: cannot open
ceph.conf: (2) No such file or directory
-1> 2018-02-01 08:48:08.319 800ae1000 -1 parse_file: cannot open
/usr/local/etc/ceph/ceph.conf: (2) No such file or directory
0> 2018-02-01 08:48:08.339 800ae1000 -1 *** Caught signal
(Segmentation fault) **
in thread 800ae1000 thread_name:
ceph version Development (no_version) mimic (dev)
1: <ceph::BackTrace::BackTrace(int)+0x6c> at
/home/jenkins/workspace/ceph-master/build/bin/unittest_log
2: <handle_fatal_signal(int)+0xcf> at
/home/jenkins/workspace/ceph-master/build/bin/unittest_log
3: <pthread_sigmask()+0x536> at /lib/libthr.so.3
NOTE: a copy of the executable, or `objdump -rdS <executable>` is
needed to interpret this.
--- logging levels ---
0/ 5 none
0/ 1 lockdep
0/ 1 context
1/ 1 crush
1/ 5 mds
1/ 5 mds_balancer
1/ 5 mds_locker
1/ 5 mds_log
1/ 5 mds_log_expire
1/ 5 mds_migrator
0/ 1 buffer
0/ 1 timer
0/ 1 filer
0/ 1 striper
0/ 1 objecter
0/ 5 rados
0/ 5 rbd
0/ 5 rbd_mirror
0/ 5 rbd_replay
0/ 5 journaler
0/ 5 objectcacher
0/ 5 client
1/ 5 osd
0/ 5 optracker
0/ 5 objclass
1/ 3 filestore
1/ 3 journal
0/ 0 ms
1/ 5 mon
0/10 monc
1/ 5 paxos
0/ 5 tp
1/ 5 auth
1/ 5 crypto
1/ 1 finisher
1/ 1 reserver
1/ 5 heartbeatmap
1/ 5 perfcounter
1/ 5 rgw
1/ 5 rgw_sync
1/10 civetweb
1/ 5 javaclient
1/ 5 asok
1/ 1 throttle
0/ 0 refs
1/ 5 xio
1/ 5 compressor
1/ 5 bluestore
1/ 5 bluefs
1/ 3 bdev
1/ 5 kstore
4/ 5 rocksdb
4/ 5 leveldb
4/ 5 memdb
1/ 5 kinetic
1/ 5 fuse
1/ 5 mgr
1/ 5 mgrc
1/ 5 dpdk
1/ 5 eventtrace
-2/-2 (syslog threshold)
99/99 (stderr threshold)
max_recent 500
max_new 1000
log_file --- end dump of recent events ---
50% tests passed, 1 tests failed out of 2
Total Test time (real) = 157.24 sec
The following tests FAILED:
17 - unittest_log (SEGFAULT)
Errors while running CTest
Build step 'Execute shell' marked build as failure
