Hello, > And now it is very weird.... I made osd.37 up, and loop > while true;do; ceph tell 1.165 query ;done Here need to explain more - all I did was start ceph-osd id=37 on storage node, in ceph osd tree this osd osd is marked as out: -17 21.49995 host stor8 22 1.59999 osd.22 up 1.00000 1.00000 23 1.59999 osd.23 up 1.00000 1.00000 36 2.09999 osd.36 up 1.00000 1.00000 37 2.09999 osd.37 up 0 1.00000 38 2.50000 osd.38 up 1.00000 1.00000 39 2.50000 osd.39 up 1.00000 1.00000 40 2.50000 osd.40 up 0 1.00000 41 2.50000 osd.41 down 0 1.00000 42 2.50000 osd.42 up 1.00000 1.00000 43 1.59999 osd.43 up 1.00000 1.00000 after start of this osd, ceph tell 1.165 query worked only for one call of this command > catch this: > https://pastebin.com/zKu06fJn > Can You tell, what is wrong now ? >>> > use ceph-objectstore-tool to export the pg from osd.6, stop some other >>> > ranodm osd (not one of these ones), import the pg into that osd, and start >>> > again. once it is up, 'ceph osd lost 6'. the pg *should* peer at that >>> > point. repeat with the same basic process with the other pg. >>> >>> I have already did 'ceph osd lost 6', do I need to do this once again ? >> Hmm not sure, if the OSD is empty then there is no harm in doing it again. >> Try that first since it might resolve it. If not, do the query loop >> above. >> s -- Pozdrowienia, Łukasz Chrustek -- To unsubscribe from this list: send the line "unsubscribe ceph-devel" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
