Thanks, It's works ! I check my history, seem that "git submodule init" didn't retrieve correctly git://github.com/ceph/leveldb.git. (maybe a temp network problem). Thanks again, Regards, Alexandre ----- Mail original ----- De: "Joao Eduardo Luis" <joao.luis@xxxxxxxxxxx> À: "Alexandre DERUMIER" <aderumier@xxxxxxxxx>, ceph-devel@xxxxxxxxxxxxxxx Envoyé: Vendredi 9 Novembre 2012 14:23:42 Objet: Re: can't build the last master git (`configure.ac' or `configure.in' is required) Hi Alexandre, Forgot to CC the list on the previous email. On 11/09/2012 01:05 PM, Alexandre DERUMIER wrote: > # ./autogen.sh > libtoolize: putting auxiliary files in `.'. > libtoolize: copying file `./ltmain.sh' > libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. > libtoolize: copying file `m4/libtool.m4' > libtoolize: copying file `m4/ltoptions.m4' > libtoolize: copying file `m4/ltsugar.m4' > libtoolize: copying file `m4/ltversion.m4' > libtoolize: copying file `m4/lt~obsolete.m4' > libtoolize: `AC_PROG_RANLIB' is rendered obsolete by `LT_INIT' > autoreconf: Entering directory `.' > autoreconf: configure.ac: not using Gettext > autoreconf: running: aclocal --force -I m4 > autoreconf: configure.ac: tracing > autoreconf: running: libtoolize --copy --force > libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'. > libtoolize: copying file `build-aux/ltmain.sh' > libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. > libtoolize: copying file `m4/libtool.m4' > libtoolize: copying file `m4/ltoptions.m4' > libtoolize: copying file `m4/ltsugar.m4' > libtoolize: copying file `m4/ltversion.m4' > libtoolize: copying file `m4/lt~obsolete.m4' > autoreconf: running: /usr/bin/autoconf --force > autoreconf: running: /usr/bin/autoheader --force > autoreconf: running: automake --add-missing --copy --force-missing > autoreconf: Leaving directory `.' > autoreconf: `configure.ac' or `configure.in' is required > I just cloned master into a new repo, and everything went just fine. My bet is now on your third command (git module update), which should read 'gir submodule update' instead. See below. I hope this helps. -Joao --- 8< --- ubuntu@plana41:~$ git clone https://github.com/ceph/ceph.git master-ceph.02 Cloning into 'master-ceph.02'... remote: Counting objects: 162231, done. remote: Compressing objects: 100% (29963/29963), done. remote: Total 162231 (delta 131844), reused 160903 (delta 130721) Receiving objects: 100% (162231/162231), 32.05 MiB | 10.05 MiB/s, done. Resolving deltas: 100% (131844/131844), done. ubuntu@plana41:~$ cd master-ceph.02/ ubuntu@plana41:~/master-ceph.02$ git submodule init Submodule 'ceph-object-corpus' (git://ceph.com/git/ceph-object-corpus.git) registered for path 'ceph-object-corpus' Submodule 'src/leveldb' (git://github.com/ceph/leveldb.git) registered for path 'src/leveldb' Submodule 'src/libs3' (git://github.com/ceph/libs3.git) registered for path 'src/libs3' ubuntu@plana41:~/master-ceph.02$ git module update git: 'module' is not a git command. See 'git --help'. Did you mean this? submodule ubuntu@plana41:~/master-ceph.02$ git submodule update Cloning into 'ceph-object-corpus'... remote: Counting objects: 6245, done. remote: Compressing objects: 100% (3454/3454), done. remote: Total 6245 (delta 770), reused 6103 (delta 655) Receiving objects: 100% (6245/6245), 734.84 KiB, done. Resolving deltas: 100% (770/770), done. Submodule path 'ceph-object-corpus': checked out '7f23ee1127101d311ec0c50adb719367a0789fad' Cloning into 'src/leveldb'... remote: Counting objects: 1074, done. remote: Compressing objects: 100% (256/256), done. remote: Total 1074 (delta 804), reused 1065 (delta 795) Receiving objects: 100% (1074/1074), 443.15 KiB | 154 KiB/s, done. Resolving deltas: 100% (804/804), done. Submodule path 'src/leveldb': checked out 'c79c270174307411819ddfdd8c9b671ec4fb69c9' Cloning into 'src/libs3'... remote: Counting objects: 1000, done. remote: Compressing objects: 100% (289/289), done. remote: Total 1000 (delta 720), reused 976 (delta 696) Receiving objects: 100% (1000/1000), 347.92 KiB, done. Resolving deltas: 100% (720/720), done. Submodule path 'src/libs3': checked out '9dc3a9c683385abfe4ad92b7c6ff30719acc3c13' ubuntu@plana41:~/master-ceph.02$ ./autogen.sh libtoolize: putting auxiliary files in `.'. libtoolize: copying file `./ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. libtoolize: copying file `m4/libtool.m4' libtoolize: copying file `m4/ltoptions.m4' libtoolize: copying file `m4/ltsugar.m4' libtoolize: copying file `m4/ltversion.m4' libtoolize: copying file `m4/lt~obsolete.m4' libtoolize: `AC_PROG_RANLIB' is rendered obsolete by `LT_INIT' configure.ac:28: installing `./compile' configure.ac:23: installing `./config.guess' configure.ac:23: installing `./config.sub' configure.ac:27: installing `./install-sh' configure.ac:27: installing `./missing' src/Makefile.am: installing `./depcomp' src/Makefile.am:1362: installing `./py-compile' autoreconf: Entering directory `.' autoreconf: configure.ac: not using Gettext autoreconf: running: aclocal --force -I m4 autoreconf: configure.ac: tracing autoreconf: running: libtoolize --install --copy --force libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'. libtoolize: copying file `build-aux/config.guess' libtoolize: copying file `build-aux/config.sub' libtoolize: copying file `build-aux/install-sh' libtoolize: copying file `build-aux/ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. libtoolize: copying file `m4/libtool.m4' libtoolize: copying file `m4/ltoptions.m4' libtoolize: copying file `m4/ltsugar.m4' libtoolize: copying file `m4/ltversion.m4' libtoolize: copying file `m4/lt~obsolete.m4' autoreconf: running: /usr/bin/autoconf --force autoreconf: running: /usr/bin/autoheader --force autoreconf: running: automake --add-missing --copy --force-missing configure.ac:24: installing `build-aux/missing' Makefile.am: installing `build-aux/depcomp' autoreconf: Leaving directory `.' autoreconf: Entering directory `.' autoreconf: configure.ac: not using Gettext autoreconf: running: aclocal --force -I m4 autoreconf: configure.ac: tracing autoreconf: running: libtoolize --install --copy --force libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. libtoolize: copying file `m4/libtool.m4' libtoolize: copying file `m4/ltoptions.m4' libtoolize: copying file `m4/ltsugar.m4' libtoolize: copying file `m4/ltversion.m4' libtoolize: copying file `m4/lt~obsolete.m4' autoreconf: running: /usr/bin/autoconf --force autoreconf: running: /usr/bin/autoheader --force autoreconf: running: automake --add-missing --copy --force-missing configure.ac:5: installing `../../ar-lib' autoreconf: Leaving directory `.' ubuntu@plana41:~/master-ceph.02$ --- 8< --- > > > ----- Mail original ----- > > De: "Joao Eduardo Luis" <joao.luis@xxxxxxxxxxx> > À: "Alexandre DERUMIER" <aderumier@xxxxxxxxx> > Envoyé: Vendredi 9 Novembre 2012 12:56:19 > Objet: Re: can't build the last master git (`configure.ac' or `configure.in' is required) > > On 11/09/2012 10:53 AM, Alexandre DERUMIER wrote: >> Hi,I need help to build last master git, >> I was building fine before, >> >> #git clone git://ceph.newdream.net/git/ceph.git >> #git submodule init >> #git module update >> #dpkg-buildpackage >> >> ... >> autoreconf: running: /usr/bin/autoconf --force >> autoreconf: running: /usr/bin/autoheader --force >> autoreconf: running: automake --add-missing --copy --force-missing >> autoreconf: Leaving directory `.' >> autoreconf: `configure.ac' or `configure.in' is required >> make: *** [configure-stamp] Error 1 >> dpkg-buildpackage: error: debian/rules build gave error exit status 2 >> >> >> Any ideas ? > > Try running 'autogen.sh' first? I'm not familiar with how > dpkg-buildpackage works, so I have no idea if it attempts to run the > autogen script, but if not, then that should be the cause for a missing > configure.* I think. > -- To unsubscribe from this list: send the line "unsubscribe ceph-devel" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
