On Thu, Aug 30, 2012 at 05:46:35PM +0200, Alexandre DERUMIER wrote:
> Thanks
>
> >> 8x SSD, 200GB each
>
> 20000 iops seem pretty low,no ?
well, you have to compare
- pure a SSD (via PCIe or SAS-6G) vs.
- Ceph-Journal, which goes 2x over 10GbE with IP
Client -> primary-copy -> 2nd-copy
(= redundancy over Ethernet distance)
I'm curious about the answer from Inktank,
-Dieter
>
>
> for @intank:
>
> Is their a bottleneck somewhere in ceph ?
Maybe "SimpleMessenger dispatching: cause of performance problems?"
from Thu, 16 Aug 2012 18:08:39 +0200
by <andreas.bluemle@xxxxxxxxxxx>
can be an answer.
Especially if a small number of OSDs is used.
>
> I said that, because I would like to know if it's scale by adding new nodes.
>
> Does Intank have already done some random iops benchmark ? (I always see sequential throughput bench in the mailing list)
>
>
> ----- Mail original -----
>
> De: "Dieter Kasper" <d.kasper@xxxxxxxxxxxx>
> À: "Alexandre DERUMIER" <aderumier@xxxxxxxxx>
> Cc: ceph-devel@xxxxxxxxxxxxxxx
> Envoyé: Jeudi 30 Août 2012 17:33:42
> Objet: Re: RBD performance - tuning hints
>
> On Thu, Aug 30, 2012 at 05:28:02PM +0200, Alexandre DERUMIER wrote:
> > Thanks for the report !
> >
> > vs your first benchmark, it's with RBD 4M or 64K ?
> with 4MB (see attached config info)
>
> Cheers,
> -Dieter
>
> >
> > (how much ssd by node?)
> 8x SSD, 200GB each
>
> >
> >
> >
> > ----- Mail original -----
> >
> > De: "Dieter Kasper" <d.kasper@xxxxxxxxxxxx>
> > À: "Alexandre DERUMIER" <aderumier@xxxxxxxxx>
> > Cc: ceph-devel@xxxxxxxxxxxxxxx
> > Envoyé: Jeudi 30 Août 2012 16:56:34
> > Objet: Re: RBD performance - tuning hints
> >
> > Hi Alexandre,
> >
> > with the 4 filestore parameter below some fio values could be increased:
> > filestore max sync interval = 30
> > filestore min sync interval = 29
> > filestore flusher = false
> > filestore queue max ops = 10000
> >
> > ###### IOPS
> > fio_read_4k_64: 9373
> > fio_read_4k_128: 9939
> > fio_randwrite_8k_16: 12376
> > fio_randwrite_4k_16: 13315
> > fio_randwrite_512_32: 13660
> > fio_randwrite_8k_32: 17318
> > fio_randwrite_4k_32: 18057
> > fio_randwrite_8k_64: 19693
> > fio_randwrite_512_64: 20015 <<<
> > fio_randwrite_4k_64: 20024 <<<
> > fio_randwrite_8k_128: 20547 <<<
> > fio_randwrite_4k_128: 20839 <<<
> > fio_randwrite_512_128: 21417 <<<
> > fio_randread_8k_128: 48872
> > fio_randread_4k_128: 50002
> > fio_randread_512_128: 51202
> >
> > ###### MB/s
> > fio_randread_2m_32: 628
> > fio_read_4m_64: 630
> > fio_randread_8m_32: 633
> > fio_read_2m_32: 637
> > fio_read_4m_16: 640
> > fio_randread_4m_16: 652
> > fio_write_2m_32: 660
> > fio_randread_4m_32: 677
> > fio_read_4m_32: 678
> > (...)
> > fio_write_4m_64: 771
> > fio_randwrite_2m_64: 789
> > fio_write_8m_128: 796
> > fio_write_4m_32: 802
> > fio_randwrite_4m_128: 807 <<<
> > fio_randwrite_2m_32: 811 <<<
> > fio_write_2m_128: 833 <<<
> > fio_write_8m_64: 901 <<<
> >
> > Best Regards,
> > -Dieter
> >
> >
> > On Wed, Aug 29, 2012 at 10:50:12AM +0200, Alexandre DERUMIER wrote:
> > > Nice results !
> > > (can you make same benchmark from a qemu-kvm guest with virtio-driver ?
> > > I have made some bench some month ago with stephan priebe, and we never be able to have more than 20000iops, with a full ssd 3nodes cluster)
> > >
> > > >>How can I set the variables when the Journal data have go to the OSD ? (after X seconds and/or when Y %-full)
> > > I think you can try to tune these values
> > >
> > > filestore max sync interval = 30
> > > filestore min sync interval = 29
> > > filestore flusher = false
> > > filestore queue max ops = 10000
> > >
> > >
> > >
> > > ----- Mail original -----
> > >
> > > De: "Dieter Kasper" <d.kasper@xxxxxxxxxxxx>
> > > À: ceph-devel@xxxxxxxxxxxxxxx
> > > Cc: "Dieter Kasper (KD)" <d.kasper@xxxxxxxxxxxx>
> > > Envoyé: Mardi 28 Août 2012 19:48:42
> > > Objet: RBD performance - tuning hints
> > >
> > > Hi,
> > >
> > > on my 4-node system (SSD + 10GbE, see bench-config.txt for details)
> > > I can observe a pretty nice rados bench performance
> > > (see bench-rados.txt for details):
> > >
> > > Bandwidth (MB/sec): 961.710
> > > Max bandwidth (MB/sec): 1040
> > > Min bandwidth (MB/sec): 772
> > >
> > >
> > > Also the bandwidth performance generated with
> > > fio --filename=/dev/rbd1 --direct=1 --rw=$io --bs=$bs --size=2G --iodepth=$threads --ioengine=libaio --runtime=60 --group_reporting --name=file1 --output=fio_${io}_${bs}_${threads}
> > >
> > > .... is acceptable, e.g.
> > > fio_write_4m_16 795 MB/s
> > > fio_randwrite_8m_128 717 MB/s
> > > fio_randwrite_8m_16 714 MB/s
> > > fio_randwrite_2m_32 692 MB/s
> > >
> > >
> > > But, the write IOPS seems to be limited around 19k ...
> > > RBD 4M 64k (= optimal_io_size)
> > > fio_randread_512_128 53286 55925
> > > fio_randread_4k_128 51110 44382
> > > fio_randread_8k_128 30854 29938
> > > fio_randwrite_512_128 18888 2386
> > > fio_randwrite_512_64 18844 2582
> > > fio_randwrite_8k_64 17350 2445
> > > (...)
> > > fio_read_4k_128 10073 53151
> > > fio_read_4k_64 9500 39757
> > > fio_read_4k_32 9220 23650
> > > (...)
> > > fio_read_4k_16 9122 14322
> > > fio_write_4k_128 2190 14306
> > > fio_read_8k_32 706 13894
> > > fio_write_4k_64 2197 12297
> > > fio_write_8k_64 3563 11705
> > > fio_write_8k_128 3444 11219
> > >
> > >
> > > Any hints for tuning the IOPS (read and/or write) would be appreciated.
> > >
> > > How can I set the variables when the Journal data have go to the OSD ? (after X seconds and/or when Y %-full)
> > >
> > >
> > > Kind Regards,
> > > -Dieter
> > >
> > >
> > >
> > > --
> > >
> > > --
> > >
> > >
> > >
> > >
> > >
> > > Alexandre D e rumier
> > >
> > > Ingénieur Systèmes et Réseaux
> > >
> > >
> > > Fixe : 03 20 68 88 85
> > >
> > > Fax : 03 20 68 90 88
> > >
> > >
> > > 45 Bvd du Général Leclerc 59100 Roubaix
> > > 12 rue Marivaux 75002 Paris
> > > --
> > > To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
> > > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
> >
> >
> >
> > --
> >
> > --
> >
> >
> >
> >
> >
> > Alexandre D e rumier
> >
> > Ingénieur Systèmes et Réseaux
> >
> >
> > Fixe : 03 20 68 88 85
> >
> > Fax : 03 20 68 90 88
> >
> >
> > 45 Bvd du Général Leclerc 59100 Roubaix
> > 12 rue Marivaux 75002 Paris
> >
>
>
>
> --
>
> --
>
>
>
>
>
> Alexandre D e rumier
>
> Ingénieur Systèmes et Réseaux
>
>
> Fixe : 03 20 68 88 85
>
> Fax : 03 20 68 90 88
>
>
> 45 Bvd du Général Leclerc 59100 Roubaix
> 12 rue Marivaux 75002 Paris
> --
> To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
