Am 02.07.2012 18:51, schrieb Gregory Farnum:
On Sun, Jul 1, 2012 at 11:12 PM, Stefan Priebe - Profihost AG
<s.priebe@xxxxxxxxxxxx> wrote:
@sage / mark
How does the aggregation work? Does it work 4MB blockwise or target node
based?
Aggregation is based on the 4MB blocks, and if you've got caching
enabled then it's also not going to flush them out to disk very often
if you're continuously updating the block — I don't remember all the
conditions, but essentially, you'll run into dirty limits and it will
asynchronously flush out the data based on a combination of how old it
is, and how long it's been since some version of it was stable on
disk.
Is there any way to check if rbd caching works correctly? For me the I/O
values do not change if i switch writeback on or of and it also doesn't
matter how large i set the cache size.
...
Ceph:
2 VMs:
write: io=2234MB, bw=25405KB/s, iops=6351, runt= 90041msec
read : io=4760MB, bw=54156KB/s, iops=13538, runt= 90007msec
write: io=56372MB, bw=638402KB/s, iops=155, runt= 90421msec
read : io=86572MB, bw=981225KB/s, iops=239, runt= 90346msec
write: io=2222MB, bw=25275KB/s, iops=6318, runt= 90011msec
read : io=4747MB, bw=54000KB/s, iops=13500, runt= 90008msec
write: io=55300MB, bw=626733KB/s, iops=153, runt= 90353msec
read : io=84992MB, bw=965283KB/s, iops=235, runt= 90162msec
I can't quite tell what's going on here, can you describe the test in
more detail?
I've network booted my VM and then run the following command:
export DISK=/dev/vda; (fio --filename=$DISK --direct=1 --rw=randwrite
--bs=4k --size=200G --numjobs=50 --runtime=90 --group_reporting
--name=file1;fio --filename=$DISK --direct=1 --rw=randread --bs=4k
--size=200G --numjobs=50 --runtime=90 --group_reporting --name=file1;fio
--filename=$DISK --direct=1 --rw=write --bs=4M --size=200G --numjobs=50
--runtime=90 --group_reporting --name=file1;fio --filename=$DISK
--direct=1 --rw=read --bs=4M --size=200G --numjobs=50 --runtime=90
--group_reporting --name=file1 )|egrep " read| write"
- write random 4k I/O
- read random 4k I/O
- write seq 4M I/O
- read seq 4M I/O
Stefan
--
To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
