Hi @all,
I compilied & configured ceph 0.26 today and now i want to start ceph
with /etc/init.d/ceph -a start oder service ceph -a start but the
service is unknown and in /etc/init.d there is noch such file!
I compiled ceph with following commands:
######################
./autogen.sh
CXXFLAGS="-g -O2" ./configure --prefix=/usr --sbindir=/sbin
--localstatedir=/var --sysconfdir=/etc
make
make install
########################
My ceph.conf in /etc/ceph/ looks like this:
#######################
; global
[global]
; enable secure authentication
auth supported = cephx
; monitors
; You need at least one. You need at least three if you want to
; tolerate any node failures. Always create an odd number.
[mon]
mon data = /data/mon$id
; some minimal logging (just message traffic) to aid debugging
debug ms = 1
[mon0]
host = ceph0
mon addr = 10.1.9.45:6789
[mon1]
host = ceph1
mon addr = 10.1.9.46:6789
....
; mds
; You need at least one. Define two to get a standby.
[mds]
; where the mds keeps its secret encryption keys
keyring = /data/keyring.$name
[mds.0]
host = ceph0
mds standby replay = true
mds standby for name = ceph1
[mds.1]
host = ceph1
mds standby replay = true
mds standby for name = ceph2
....
; osd
; You need at least one. Two if you want data to be replicated.
; Define as many as you like.
[osd]
; This is where the btrfs volume will be mounted.
osd data = /data/osd$id
; Ideally, make this a separate disk or partition. A few GB
; is usually enough; more if you have fast disks. You can use
; a file under the osd data dir if need be
; (e.g. /data/osd$id/journal), but it will be slower than a
; separate disk or partition.
osd journal = /data/osd$id/journal
; If the OSD journal is a file, you need to specify the size.
This is specified in MB.
osd journal size = 512
[osd0]
; if 'btrfs devs' is not specified, you're responsible for
; setting up the 'osd data' dir. if it is not btrfs, things
; will behave up until you try to recover from a crash (which
; usually fine for basic testing).
host = ceph0
btrfs devs = /dev/sdb1
[osd1]
host = ceph1
btrfs devs = /dev/sdb1
....
#######################
When I want to start ceph with ceph -c /etc/ceph/ceph.conf I got
following messages:
#######################
2011-04-14 08:59:59.236688 4049d940 -- :/10014 >> 10.1.9.45:6789/0
pipe(0x7f1ff4000ad0 sd=3 pgs=0 cs=0 l=0).fault first fault
2011-04-14 09:00:02.237107 41190940 -- :/10014 >> 10.1.9.48:6789/0
pipe(0x7f1ff4001570 sd=3 pgs=0 cs=0 l=0).fault first fault
2011-04-14 09:00:05.237271 4049d940 -- :/10014 >> 10.1.9.47:6789/0
pipe(0x7f1ff4000ad0 sd=3 pgs=0 cs=0 l=0).fault first fault
2011-04-14 09:00:08.237502 41190940 -- :/10014 >> 10.1.9.48:6789/0
pipe(0x7f1ff4001570 sd=4 pgs=0 cs=0 l=0).fault first fault
2011-04-14 09:00:11.237709 4049d940 -- :/10014 >> 10.1.9.47:6789/0
pipe(0x7f1ff4000ad0 sd=3 pgs=0 cs=0 l=0).fault first fault
2011-04-14 09:00:14.237554 41190940 -- :/10014 >> 10.1.9.46:6789/0
pipe(0x7f1ff4001570 sd=3 pgs=0 cs=0 l=0).fault first fault
2011-04-14 09:00:17.238122 4049d940 -- :/10014 >> 10.1.9.47:6789/0
pipe(0x7f1ff4000ad0 sd=3 pgs=0 cs=0 l=0).fault first fault
2011-04-14 09:00:20.238162 41190940 -- :/10014 >> 10.1.9.46:6789/0
pipe(0x7f1ff4001570 sd=3 pgs=0 cs=0 l=0).fault first fault
2011-04-14 09:00:23.238641 4049d940 -- :/10014 >> 10.1.9.45:6789/0
pipe(0x7f1ff4000ad0 sd=3 pgs=0 cs=0 l=0).fault first fault
2011-04-14 09:00:26.238939 41190940 -- :/10014 >> 10.1.9.48:6789/0
pipe(0x7f1ff4001570 sd=3 pgs=0 cs=0 l=0).fault first fault
2011-04-14 09:00:29.239232 4049d940 -- :/10014 >> 10.1.9.45:6789/0
pipe(0x7f1ff4000ad0 sd=3 pgs=0 cs=0 l=0).fault first fault
2011-04-14 09:00:32.239554 41190940 -- :/10014 >> 10.1.9.47:6789/0
pipe(0x7f1ff4001570 sd=3 pgs=0 cs=0 l=0).fault first fault
2011-04-14 09:00:35.239555 4049d940 -- :/10014 >> 10.1.9.46:6789/0
pipe(0x7f1ff4000ad0 sd=3 pgs=0 cs=0 l=0).fault first fault
#######################
I realy hope someone can help me....
Best regards,
Christoph Raible
--
Vorstand/Board of Management:
Dr. Bernd Finkbeiner, Dr. Roland Niemeier,
Dr. Arno Steitz, Dr. Ingrid Zech
Vorsitzender des Aufsichtsrats/
Chairman of the Supervisory Board:
Philippe Miltin
Sitz/Registered Office: Tuebingen
Registergericht/Registration Court: Stuttgart
Registernummer/Commercial Register No.: HRB 382196
--
To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
