Hello Sage,
I moved to the kernel 2.6.35, keeping ext3 filesystem.
After executing teh same command:
svn co https://root.cern.ch/svn/root/trunk root
System is again dead. The command and kjournald are stuck
bogdan 8539 0.9 0.6 31168 22040 pts/0 DL+ 16:44 0:21 svn co https://root.cern.ch/svn/root/trunk root
root 802 0.0 0.0 0 0 ? D 12:59 0:01 [kjournald]
Looks like the bug is not fixed,
dmesg shows:
---------
[14325.304068] kernel BUG at
/build/buildd/linux-maverick-2.6.35/fs/ext3/balloc.c:1385!
[14325.304191] invalid opcode: 0000 [#1] SMP
[14325.304263] last sysfs file:
/sys/devices/pci0000:00/0000:00:00.0/device
[14325.304266] Modules linked in: nfs lockd fscache nfs_acl auth_rpcgss
sunrpc ceph crc32c libcrc32c radeon ttm drm_kms_helper drm mptctl psmouse
agpgart i5000_edac usbhid hid edac_core i2c_algo_bit bnx2 i5k_amb dcdbas
shpchp serio_raw mptsas mptscsih mptbase scsi_transport_sas
[14325.304266]
[14325.304266] Pid: 8391, comm: cosd Not tainted 2.6.35-14-generic
#20~lucid2-Ubuntu 0DT097/PowerEdge 1950
[14325.304266] EIP: 0060:[<c0274a4d>] EFLAGS: 00210286 CPU: 1
[14325.304266] EIP is at ext3_try_to_allocate_with_rsv+0x1cd/0x2b0
[14325.304266] EAX: 00000027 EBX: c8641440 ECX: c07d7cfc EDX: 00000000
[14325.304266] ESI: 007b7fff EDI: f640fa00 EBP: f5823c50 ESP: f5823c10
[14325.304266] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[14325.304266] Process cosd (pid: 8391, ti=f5822000 task=f6b7bf70
task.ti=f5822000)
[14325.304266] Stack:
[14325.304266] 000000f6 c6c11930 c0273a58 00001000 f62e549c 00000007
c8641454 007b7fff
[14325.304266] <0> f6f7e420 007b0000 000000f6 f640de00 00000001 000000f6
c4063ec0 00000000
[14325.304266] <0> f5823cc0 c0274daf c6c11930 ffffffff c8641440 f5823ca8
f5823cac c0256017
[14325.304266] Call Trace:
[14325.304266] [<c0273a58>] ? read_block_bitmap+0x48/0x160
[14325.304266] [<c0274daf>] ? ext3_new_blocks+0x1ff/0x610
[14325.304266] [<c0256017>] ? mb_cache_entry_find_first+0x67/0x80
[14325.304266] [<c02751e5>] ? ext3_new_block+0x25/0x30
[14325.304266] [<c0287721>] ? ext3_xattr_block_set+0x481/0x550
[14325.304266] [<c0286490>] ? ext3_xattr_set_entry+0x20/0x2f0
[14325.304266] [<c0287b0b>] ? ext3_xattr_set_handle+0x31b/0x400
[14325.304266] [<c0287c65>] ? ext3_xattr_set+0x75/0xc0
[14325.304266] [<c0287d24>] ? ext3_xattr_user_set+0x74/0x80
[14325.304266] [<c023348b>] ? generic_setxattr+0x9b/0xb0
[14325.304266] [<c02333f0>] ? generic_setxattr+0x0/0xb0
[14325.304266] [<c0234084>] ? __vfs_setxattr_noperm+0x44/0x150
[14325.304266] [<c03017dc>] ? cap_inode_setxattr+0x2c/0x60
[14325.304266] [<c0234221>] ? vfs_setxattr+0x91/0xa0
[14325.304266] [<c02342e8>] ? setxattr+0xb8/0x110
[14325.304266] [<c0221d0e>] ? path_to_nameidata+0x1e/0x50
[14325.304266] [<c0223492>] ? link_path_walk+0x412/0x890
[14325.304266] [<c013a159>] ? enqueue_task_fair+0x39/0x80
[14325.304266] [<c022ff3f>] ? mntput_no_expire+0x1f/0xd0
[14325.304266] [<c022ff3f>] ? mntput_no_expire+0x1f/0xd0
[14325.304266] [<c022168b>] ? putname+0x2b/0x40
[14325.304266] [<c022470a>] ? user_path_at+0x4a/0x80
[14325.304266] [<c0179902>] ? sys_futex+0x72/0x120
[14325.304266] [<c0234503>] ? sys_setxattr+0x83/0x90
[14325.304266] [<c05c9bb4>] ? syscall_call+0x7/0xb
[14325.304266] [<c05c0000>] ? cache_add_dev+0x73/0x195
[14325.304266] Code: 83 3a ff ff ff 90 39 45 dc c7 45 0c ff ff ff ff 0f 83
32 ff ff ff 8b 87 80 01 00 00 ba 5a 7e 5e c0 05 d0 00 00 00 e8 83 f1 ff ff
<0f> 0b eb fe 8b 45 ec 89 55 d4 05 cc 00 00 00 89 45 ec e8 ec 4b
[14325.304266] EIP: [<c0274a4d>] ext3_try_to_allocate_with_rsv+0x1cd/0x2b0
SS:ESP 0068:f5823c10
[14325.326777] ---[ end trace 53e0b3b55af7a83c ]---
[14384.001261] ceph: mds0 caps stale
[14413.616132] ceph: tid 33594 timed out on osd2, will reset osd
[14628.992279] ceph: mds0 hung
---------
as a next step I wil try to use btrfs .
Cheers,
Bogdan
On Fri, 27 Aug 2010, Sage Weil wrote:
Hi Bogdan,
This is a bug in the ext3 xattr code. It seems to be gone in 2.6.34 and
later. Or, you can switch to btrfs!
sage
On Fri, 27 Aug 2010, Bogdan Lobodzinski wrote:
Hello,
working with ceph on my test configuration
(3 nodes Ubuntu 10.04.1 LTS, Linux 2.6.32-24-generic-pae #41-Ubuntu SMP)
After starting
svn co https://root.cern.ch/svn/root/trunk root
on the /ceph directory, the command become stuck, and also:
root 5303 0.0 0.0 0 0 ? D Aug26 0:00 [kjournald]
root 30181 0.0 0.0 6972 2056 pts/1 D+ 13:46 0:00 /usr//bin/cosd
-i 2 -c /etc/ceph/ceph.conf
any mount, unmount are going also to the state D.
This is a permanennt behaviour of the ceph if the command is started.
dmesg shows:
-------------
[99048.567704] ------------[ cut here ]------------
[99048.568767] kernel BUG at
/build/buildd/linux-2.6.32/fs/ext3/balloc.c:1384!
[99048.568767] invalid opcode: 0000 [#1] SMP
[99048.568767] last sysfs file: /sys/devices/pci0000:00/0000:00:00.0/device
[99048.596652] Modules linked in: nfs lockd nfs_acl auth_rpcgss sunrpc ceph
crc32c libcrc32c openafs(P) fbcon tileblit font bitblit softcursor vga
vgastate mptctl radeon ttm drm_kms_helper drm bnx2 psmouse i5000_edac
edac_core agpgart serio_raw i5k_amb i2c_algo_bit shpchp dell_wmi dcdbas
usbhid mptsas mptscsih mptbase scsi_transport_sas
[99048.596652]
[99048.596652] Pid: 6258, comm: cosd Tainted: P
(2.6.32-24-generic-pae #41-Ubuntu) PowerEdge 1950
[99048.596652] EIP: 0060:[<c026dc8d>] EFLAGS: 00210296 CPU: 3
[99048.596652] EIP is at ext3_try_to_allocate_with_rsv+0x1cd/0x2b0
[99048.596652] EAX: 00000027 EBX: f6dd5480 ECX: fffe48f7 EDX: 00000000
[99048.596652] ESI: 02147fff EDI: f625e200 EBP: f5ccbc54 ESP: f5ccbc14
[99048.596652] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[99048.596652] Process cosd (pid: 6258, ti=f5cca000 task=f6263300
task.ti=f5cca000)
[99048.596652] Stack:
[99048.596652] 00000428 f14f1bc0 c026cc88 00001000 00000007 f1a80e9c
f6dd5494 02147fff
[99048.596652] <0> f70d89c0 02140000 00000428 f625d800 00000001 00000428
f1058500 00000000
[99048.596652] <0> f5ccbcc8 c026e048 f14f1bc0 ffffffff f6dd5480 f5ccbcb0
f5ccbcb4 f5ccbc90
[99048.596652] Call Trace:
[99048.596652] [<c026cc88>] ? read_block_bitmap+0x48/0x160
[99048.596652] [<c026e048>] ? ext3_new_blocks+0x228/0x6c0
[99048.596652] [<c024fbd7>] ? mb_cache_entry_find_first+0x67/0x80
[99048.596652] [<c026e505>] ? ext3_new_block+0x25/0x30
[99048.596652] [<c02809a4>] ? ext3_xattr_block_set+0x554/0x670
[99048.596652] [<c027f589>] ? ext3_xattr_set_entry+0x29/0x350
[99048.596652] [<c0280d8b>] ? ext3_xattr_set_handle+0x2cb/0x3e0
[99048.596652] [<c0280f15>] ? ext3_xattr_set+0x75/0xc0
[99048.596652] [<c0280fd6>] ? ext3_xattr_user_set+0x76/0x80
[99048.596652] [<c022dd8c>] ? generic_setxattr+0x9c/0xb0
[99048.596652] [<c022dcf0>] ? generic_setxattr+0x0/0xb0
[99048.596652] [<c022e984>] ? __vfs_setxattr_noperm+0x44/0x160
[99048.596652] [<c02fed4c>] ? cap_inode_setxattr+0x2c/0x60
[99048.596652] [<c022eb31>] ? vfs_setxattr+0x91/0xa0
[99048.596652] [<c022ebf8>] ? setxattr+0xb8/0x110
[99048.596652] [<c021d512>] ? __link_path_walk+0x632/0xca0
[99048.596652] [<c014e369>] ? enqueue_task_fair+0x39/0x80
[99048.596652] [<c022a9bf>] ? mntput_no_expire+0x1f/0xe0
[99048.596652] [<c022a9bf>] ? mntput_no_expire+0x1f/0xe0
[99048.596652] [<c021be45>] ? path_put+0x25/0x30
[99048.596652] [<c021ba8b>] ? putname+0x2b/0x40
[99048.596652] [<c021ea6a>] ? user_path_at+0x4a/0x80
[99048.596652] [<c0183242>] ? sys_futex+0x72/0x120
[99048.596652] [<c022ee13>] ? sys_setxattr+0x83/0x90
[99048.596652] [<c0109763>] ? sysenter_do_call+0x12/0x28
[99048.596652] Code: 83 3a ff ff ff 90 39 45 dc c7 45 0c ff ff ff ff 0f 83
32 ff ff ff 8b 87 84 01 00 00 ba ba c6 5c c0 05 d0 00 00 00 e8 73 f1 ff<0f>
0b eb fe 8b 45 ec 89 55 d4 05 cc 00 00 00 89 45 ec e8 fc 53
[99048.596652] EIP: [<c026dc8d>] ext3_try_to_allocate_with_rsv+0x1cd/0x2b0
SS:ESP 0068:f5ccbc14
[99049.044090] ---[ end trace 35860103963ee444 ]---
h1farm184#
--------------------
my ceph.conf is:
-------
[global]
pid file = /var/run/ceph/$name.pid
debug ms = 1
keyring = /etc/ceph/keyring.bin
; monitors
[mon]
;Directory for monitor files
mon data = /x02/mon$id
debug mon = 20
debug paxos = 20
mon lease wiggle room = 0.5
[mon0]
host = h1farm182
mon addr = xxx.xxx.xx.116:6789
[mon1]
host = h1farm183
mon addr = xxx.xxx.xx.117:6789
; metadata servers
[mds]
debug mds = 20
mds log max segments = 2
keyring = /etc/ceph/keyring.$name
[mds0]
host = h1farm182
[mds1]
host = h1farm183
[osd]
sudo = true
osd data = /x02/osd$id
osd journal = /x02/osd$id/journal
osd journal size = 100
keyring = /etc/ceph/keyring.$name
debug osd = 20
debug journal = 20
debug filestore = 20
;osd journal size = 100
[osd0]
host = h1farm182
[osd1]
host = h1farm183
[osd2]
host = h1farm184
-------
Any idea how to improve the situation ?
--
To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
