On Mon, Aug 2, 2010 at 4:51 PM, Rudi Ahlers <Rudi@xxxxxxxxxxx> wrote: > > I hope someone can help me. I'm trying to setup a D-Link DWA-547 on > CentOS 5.5 x64 in console only mode, i.e. there's no X installed. The > Wiki article suggests using NetWork Manager, but since there's no X > installed on this server, it's not possible. > > How do I go about installing this card? > > Here's the output of lspci -v: > > 01:00.0 Network controller: Atheros Communications Inc. AR5008 > Wireless Network Adapter (rev 01) > Subsystem: D-Link System Inc Unknown device 3a6b I can only point you in the right direction (sorry!). This is from memory and from a setup that I've used on Fedora in the past so CentOS _should_ be similar... You have to install wpa_supplicant and the relevant configuration files are: /etc/wpa_supplicant/wap_supplicant.conf /etc/sysconfig/wpa_supplicant /etc/sysconfig/network-scripts/ifcfg-eth0 /etc/sysconfig/network-scripts/keys-eth0 _______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx http://lists.centos.org/mailman/listinfo/centos