Situation: two similar servers, both with CentOS 5.4 64-bit. Making
an ext3 filesystem on one takes seconds, on the other minutes.
Partition Size Server 1 Server 2
1 GB 0.7 sec 0.3 sec
4 GB 2.5 sec 1.2 sec
40 GB 15 sec 13 min
WTF
e2fsprogs RPM is e2fsprogs-1.39-23.el5 on both systems
mkfs --version reports "util-linux 2.13-pre7" on both systems
mkfs -V reports the same on both systems (mke2fs 1.3 (29-May-2006)
Using EXT2FS Library version 1.39)
file size on mkfs and mkfs.ext3 binaries is identical
However, checksum on these binaries differs across servers, and "cmp"
reports files are different
I took "mkfs" and "mkfs.ext3" from server 1, put them on server 2, and
got an improvement:
40 GB 15 sec 3 min
Just out of curiousity, I ran "rpm -V e2fsprogs" to see if rpm would
pick up the difference and sure enough, it complained mkfs.ext3
changed.
Both of these servers have CentOS 5.4; Server 1 was installed in Dec
2009, Server 2 in April 2010.
I'd like to:
(a) account for the difference in the binaries, and
(b) see if something else is different that I can make the same to get
the mkfs.ext3 time down to 15 sec on both systems.
Solving (a) should shed light on (b). Any ideas?
Best,
Aleksey
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
