Re: centos 5.5 on optiplex 745

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



From: centos-bounces@xxxxxxxxxx [mailto:centos-bounces@xxxxxxxxxx] On
Behalf Of Janez Kosmrlj
Sent: maandag 28 juni 2010 13:59
To: CentOS mailing list
Subject:  centos 5.5 on optiplex 745

Hi,
we have some old dell optiplex 745 machines which have the Intel 965q
chipset. The problem is, that they freeze as soon as the system tries to
start the X system. It happens even before any log is written. This
happens almost every time (for some reason it sometimes work, but 99% it
fails). When i change the graphic driver in xorg.conf from intel to vesa
it mostly works, but still i sometimes get a flickering screen, but this
can mostly be resolved using ctrl+alt+backspace (sometimes you have to
try this twice). We use the 1024x768 and 24 bit colors, so this
shouldn't be the problem. 

Does anyone know a fix for this problem?

______________________________________________________

This is an issue with the graphics, it gets initialized in the wrong way
( driver ) The installer does not recognize the correct video chip
during install.
If you boot the system in runlevel 3 and then change the driver to i810
in the device section of /etc/X11/xorg.conf :

Section "Device"
        Identifier  "Videocard0"
        Driver      "i810"
EndSection

Good luck,
Edwin

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos


[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux