So I tried moving the GATEWAY clause into etc/sysconfig/network and
out of the individual ifcfg-eth? files. It works.
So I guess that's the preferred solution, because it puts the
information in a single place. There's no need to make sure two or
more places are synchronized if anything changes.
Thanks to all!
Rick
On Jun 22, 2010, at 2:51 PM, Rick Thomas wrote:
> Thanks! to all who replied.
>
> I solved it by putting identical "GATEWAY=" clauses in each of
>
> /etc/sysconfig/networking/devices/ifcfg-eth0
> /etc/sysconfig/networking/devices/ifcfg-eth1
>
> This works without error, even though the gateway IP address in
> question is not accessible from eth1.
>
> I haven't tried taking the GATEWAY clause(s) out of the ifcfg files
> and moving it to the /etc/sysconfig/network file alone. Does
> anybody know if that's the preferred configuration option?
>
> Thanks!
>
> Rick
>
>> El lun, 21-06-2010 a las 19:57 -0400, Rick Thomas escribió:
>>> I have a machine with two net interfaces.
>>>
>>> it seems to always pick the wrong one (eth1) as the default route.
>>>
>>> I can change it with
>>>
>>> route del default
>>> route add default eth0
>>>
>>> after it's up (or in rc.local, of course), but I'd like to figure
>>> out
>>> what I need to do this "the CentOS way" (e.g. edit some
>>> configuration
>>> file? Run some config utility, what?) once and for all.
>>>
>>> Can somebody point me to the canonical documentation on the subject?
>>> I've searched /usr/share/doc and the man pages, but I can't find
>>> anything useful.
>>>
>>> Googling for "default route centos" gives some interesting stuff,
>>> but
>>> nothing definitive.
>
>
>
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
