Peter Kjellstrom wrote:
> On Friday 18 June 2010, Jerry Geis wrote:
>
>> I just installed centos 5.5 x86_64 on a new HP laptop.
>> It has the core i5 processor.
>>
>> only 1 cpu is detected should be 2.
>>
>> This has happened before. Is upstream not keeping up with
>> new processors released and updating the kernel?
>>
>
> I've used the stock CentOS kernel with even unreleased CPUs, there is no
> general need for CPU to be supported.
>
> Maybe this is a bios problem.
>
> More information would also be nice (like dmesg output).
>
> /Peter
>
>
>> I'd rather not go through the process again of putting a newer kernel
>> on the machine and having something different out there than "stock"
>> centos.
>>
>> Jerry
>>
more /proc/cpuinfo is showing:
more /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 37
model name : Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz
stepping : 2
cpu MHz : 2261.291
cache size : 3072 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall
nx rdtscp lm constant_tsc up ida nonstop_tsc arat pni monitor ds_cpl vmx
est tm2 ssse3 cx16
xtpr sse4_1 sse4_2 popcnt lahf_lm
bogomips : 4522.58
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management: [8]
dmesg is :
Linux version 2.6.18-194.3.1.el5 (mockbuild@xxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Thu May 13 13:08:30 EDT 2010
Command line: ro root=LABEL=/ rhgb quiet noapic acpi=off apci=off
BIOS-provided physical RAM map:
BIOS-e820: 0000000000010000 - 000000000009d000 (usable)
BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf63f000 (usable)
BIOS-e820: 00000000bf63f000 - 00000000bf6bf000 (reserved)
BIOS-e820: 00000000bf6bf000 - 00000000bf7bf000 (ACPI NVS)
BIOS-e820: 00000000bf7bf000 - 00000000bf7ff000 (ACPI data)
BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable)
BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
DMI 2.6 present.
No NUMA configuration found
Faking a node at 0000000000000000-000000013c000000
Bootmem setup node 0 0000000000000000-000000013c000000
No mptable found.
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
On node 0 totalpages: 1010585
DMA zone: 2625 pages, LIFO batch:0
DMA32 zone: 765560 pages, LIFO batch:31
Normal zone: 242400 pages, LIFO batch:31
Nosave address range: 000000000009d000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000e0000
Nosave address range: 00000000000e0000 - 0000000000100000
Nosave address range: 00000000bf63f000 - 00000000bf6bf000
Nosave address range: 00000000bf6bf000 - 00000000bf7bf000
Nosave address range: 00000000bf7bf000 - 00000000bf7ff000
Nosave address range: 00000000bf800000 - 00000000c0000000
Nosave address range: 00000000c0000000 - 00000000e0000000
Nosave address range: 00000000e0000000 - 00000000f0000000
Nosave address range: 00000000f0000000 - 00000000feb00000
Nosave address range: 00000000feb00000 - 00000000feb04000
Nosave address range: 00000000feb04000 - 00000000fec00000
Nosave address range: 00000000fec00000 - 00000000fec01000
Nosave address range: 00000000fec01000 - 00000000fed10000
Nosave address range: 00000000fed10000 - 00000000fed14000
Nosave address range: 00000000fed14000 - 00000000fed18000
Nosave address range: 00000000fed18000 - 00000000fed1a000
Nosave address range: 00000000fed1a000 - 00000000fed1b000
Nosave address range: 00000000fed1b000 - 00000000fed20000
Nosave address range: 00000000fed20000 - 00000000fee00000
Nosave address range: 00000000fee00000 - 00000000fee01000
Nosave address range: 00000000fee01000 - 00000000ffe80000
Nosave address range: 00000000ffe80000 - 0000000100000000
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
SMP: Allowing 0 CPUs, 0 hotplug CPUs
Built 1 zonelists. Total pages: 1010585
Kernel command line: ro root=LABEL=/ rhgb quiet noapic acpi=off apci=off
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
ACPI: DMAR not present
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x1623000 - 0x5623000
Memory: 3966292k/5177344k available (2573k kernel code, 152032k reserved, 1305k data, 212k init)
Calibrating delay loop (skipped), value calculated using timer frequency.. 4522.58 BogoMIPS (lpj=2261291)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 3072K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
SMP alternatives: switching to UP code
Freeing SMP alternatives: 32k freed
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
Using local APIC timer interrupts.
Detected 8.313 MHz APIC timer.
testing NMI watchdog ... OK.
SMP disabled
Brought up 1 CPUs
testing NMI watchdog ... OK.
time.c: Using 1.193182 MHz WALL PIT GTOD PIT/TSC timer.
time.c: Detected 2261.291 MHz processor.
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=216 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=96 bytes
sizeof(skbuff)=248 bytes
checking if image is initramfs... it is
Freeing initrd memory: 2601k freed
NET: Registered protocol family 16
PCI: Using configuration type 1
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
PCI: Transparent bridge - 0000:00:1e.0
PCI: Discovered primary peer bus 06 [IRQ]
PCI: Discovered primary peer bus 07 [IRQ]
PCI: Discovered primary peer bus 08 [IRQ]
PCI: Discovered primary peer bus 0b [IRQ]
PCI: Using IRQ router PIIX/ICH [8086/3b03] at 0000:00:1f.0
PCI: setting IRQ 11 as level-triggered
PCI: Found IRQ 11 for device 0000:00:01.0
PCI: Sharing IRQ 11 with 0000:00:1a.0
PCI: Sharing IRQ 11 with 0000:00:1c.1
PCI: Sharing IRQ 11 with 0000:00:1c.7
PCI: Sharing IRQ 11 with 0000:01:00.0
PCI: Sharing IRQ 11 with 0000:01:00.1
PCI: Sharing IRQ 11 with 0000:02:00.0
PCI: Sharing IRQ 11 with 0000:03:00.0
PCI: Found IRQ 11 for device 0000:00:1c.0
PCI: Sharing IRQ 11 with 0000:00:1c.4
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: DMAR not present
PCI-GART: No AMD northbridge found.
PCI: Bridge: 0000:00:01.0
IO window: 6000-6fff
MEM window: d2000000-d30fffff
PREFETCH window 0x00000000c0000000-0x00000000d1ffffff
PCI: Bridge: 0000:00:1c.0
IO window: 5000-5fff
MEM window: da100000-db0fffff
PREFETCH window 0x00000000d3100000-0x00000000d40fffff
PCI: Bridge: 0000:00:1c.1
IO window: 4000-4fff
MEM window: d9100000-da0fffff
PREFETCH window 0x00000000d4100000-0x00000000d50fffff
PCI: Bridge: 0000:00:1c.4
IO window: 3000-3fff
MEM window: d8100000-d90fffff
PREFETCH window 0x00000000d5100000-0x00000000d60fffff
PCI: Bridge: 0000:00:1c.7
IO window: 2000-2fff
MEM window: d7100000-d80fffff
PREFETCH window 0x00000000d6100000-0x00000000d70fffff
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Found IRQ 11 for device 0000:00:01.0
PCI: Sharing IRQ 11 with 0000:00:1a.0
PCI: Sharing IRQ 11 with 0000:00:1c.1
PCI: Sharing IRQ 11 with 0000:00:1c.7
PCI: Sharing IRQ 11 with 0000:01:00.0
PCI: Sharing IRQ 11 with 0000:01:00.1
PCI: Sharing IRQ 11 with 0000:02:00.0
PCI: Sharing IRQ 11 with 0000:03:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Found IRQ 11 for device 0000:00:1c.0
PCI: Sharing IRQ 11 with 0000:00:1c.4
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Found IRQ 11 for device 0000:00:1c.1
PCI: Sharing IRQ 11 with 0000:00:01.0
PCI: Sharing IRQ 11 with 0000:00:1a.0
PCI: Sharing IRQ 11 with 0000:00:1c.7
PCI: Sharing IRQ 11 with 0000:01:00.0
PCI: Sharing IRQ 11 with 0000:01:00.1
PCI: Sharing IRQ 11 with 0000:02:00.0
PCI: Sharing IRQ 11 with 0000:03:00.0
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Found IRQ 11 for device 0000:00:1c.4
PCI: Sharing IRQ 11 with 0000:00:1c.0
PCI: Setting latency timer of device 0000:00:1c.4 to 64
PCI: Found IRQ 11 for device 0000:00:1c.7
PCI: Sharing IRQ 11 with 0000:00:01.0
PCI: Sharing IRQ 11 with 0000:00:1a.0
PCI: Sharing IRQ 11 with 0000:00:1c.1
PCI: Sharing IRQ 11 with 0000:01:00.0
PCI: Sharing IRQ 11 with 0000:01:00.1
PCI: Sharing IRQ 11 with 0000:02:00.0
PCI: Sharing IRQ 11 with 0000:03:00.0
PCI: Setting latency timer of device 0000:00:1c.7 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1276842957.285:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key 7664334D64FC7447
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1c.4 to 64
PCI: Setting latency timer of device 0000:00:1c.7 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
brd: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Initalizing network drop monitor service
Freeing unused kernel memory: 212k freed
Write protecting the kernel read-only data: 504k
input: AT Translated Set 2 keyboard as /class/input/input0
PCI: Found IRQ 11 for device 0000:00:1a.0
PCI: Sharing IRQ 11 with 0000:01:00.0
PCI: Sharing IRQ 11 with 0000:01:00.1
PCI: Sharing IRQ 11 with 0000:02:00.0
PCI: Sharing IRQ 11 with 0000:03:00.0
PCI: Setting latency timer of device 0000:00:1a.0 to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
PCI: cache line size of 32 is not supported by device 0000:00:1a.0
ehci_hcd 0000:00:1a.0: irq 11, io mem 0xdb105c00
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
PCI: Found IRQ 11 for device 0000:00:1d.0
PCI: Setting latency timer of device 0000:00:1d.0 to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
PCI: cache line size of 32 is not supported by device 0000:00:1d.0
ehci_hcd 0000:00:1d.0: irq 11, io mem 0xdb105800
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
PCI: setting IRQ 10 as level-triggered
PCI: Found IRQ 10 for device 0000:00:1f.2
PCI: Sharing IRQ 10 with 0000:00:1f.3
PCI: Sharing IRQ 10 with 0000:00:1f.6
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa00000
usb 2-1: new high speed USB device using ehci_hcd and address 2
input: SynPS/2 Synaptics TouchPad as /class/input/input1
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 2-1.3: new full speed USB device using ehci_hcd and address 3
usb 2-1.3: configuration #1 chosen from 1 choice
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xdb105000 port 0xdb105100 irq 105
ata2: SATA max UDMA/133 abar m2048@0xdb105000 port 0xdb105180 irq 105
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xdb105000 port 0xdb105300 irq 105
ata6: SATA max UDMA/133 abar m2048@0xdb105000 port 0xdb105380 irq 105
usb 2-1.5: new high speed USB device using ehci_hcd and address 4
usb 2-1.5: configuration #1 chosen from 1 choice
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: Hitachi HTS725050A9A364, PC4OC72E, max UDMA/100
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/100
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: hp DVDWBD TS-LB23L, 0400, max UDMA/100, ATAPI AN
ata2.00: configured for UDMA/100
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
Vendor: ATA Model: Hitachi HTS72505 Rev: PC4O
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
Vendor: hp Model: DVDWBD TS-LB23L Rev: 0400
Type: CD-ROM ANSI SCSI revision: 05
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@xxxxxxxxxx
device-mapper: dm-raid45: initialized v0.2594l
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1276842984.285:2): selinux=0 auid=4294967295 ses=4294967295
input: PC Speaker as /class/input/input2
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device HP Webcam (0408:03ba)
input: HP Webcam as /class/input/input3
usbcore: registered new driver uvcvideo
USB Video Class driver (v0.1.0)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sdhci: Secure Digital Host Controller Interface driver, 0.12
sdhci: Copyright(c) Pierre Ossman
sdhci: SDHCI controller found at 0000:04:00.2 [197b:2381] (rev 0)
PCI: Found IRQ 11 for device 0000:04:00.2
PCI: Sharing IRQ 11 with 0000:04:00.0
PCI: Sharing IRQ 11 with 0000:04:00.1
PCI: Sharing IRQ 11 with 0000:04:00.3
PCI: Sharing IRQ 11 with 0000:04:00.4
sdhci:slot0: Unknown controller version (1). You may experience problems.
PCI: Setting latency timer of device 0000:04:00.2 to 64
mmc0: SDHCI at 0xd8100a00 irq 11 DMA
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
PCI: Found IRQ 11 for device 0000:03:00.0
PCI: Sharing IRQ 11 with 0000:00:1a.0
PCI: Sharing IRQ 11 with 0000:01:00.0
PCI: Sharing IRQ 11 with 0000:01:00.1
PCI: Sharing IRQ 11 with 0000:02:00.0
PCI: Setting latency timer of device 0000:03:00.0 to 64
eth0: RTL8168d/8111d at 0xffffc2000001e000, c8:0a:a9:94:85:03, XID 083000c0 IRQ 113
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
PCI: Found IRQ 10 for device 0000:00:1f.3
PCI: Sharing IRQ 10 with 0000:00:1f.6
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
iwlagn: Copyright(c) 2003-2009 Intel Corporation
PCI: Found IRQ 11 for device 0000:02:00.0
PCI: Sharing IRQ 11 with 0000:00:1a.0
PCI: Sharing IRQ 11 with 0000:01:00.0
PCI: Sharing IRQ 11 with 0000:01:00.1
PCI: Setting latency timer of device 0000:02:00.0 to 64
iwlagn: Detected Intel Wireless WiFi Link 6000 Series 2x2 AGN REV=0x74
iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
phy0: Selected rate control algorithm 'iwl-agn-rs'
PCI: Found IRQ 10 for device 0000:00:1b.0
PCI: Setting latency timer of device 0000:00:1b.0 to 64
input: HDA Digital PCBeep as /class/input/input4
floppy0: no floppy controllers found
lp: driver loaded but no devices found
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
loop: loaded (max 8 devices)
EXT3 FS on sda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 4096564k swap on /dev/sda2. Priority:-1 extents:1 across:4096564k
IA-32 Microcode Update Driver: v1.14a <tigran@xxxxxxxxxxx>
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
r8169: eth0: link up
r8169: eth0: link up
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
dahdi: Telephony Interface Registered on major 196
dahdi: Version: 2.2.1
dahdi: Registered tone zone 0 (United States / North America)
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
eth0: no IPv6 routers present
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
