Hello All,
I don't have any reason to believe CENTOS (5.4) is underlying my
difficulties but it's what I've got to work with so here's the setup:
I have a 2P motherboard with 2 Opteron 2376s and two ethernet ports.
The setup is fully virtualized, with Dom0, dom4 and Dom1 up and
running. dom4 is attached to a dhcp service on eth0 and has no problems.
I've recently connected dom1 to eth1. eth1 is connected to a dsl modem
(no router) and to the ISP's dsl signal It has a static IP address,
204.174.35.205. At intervals of a few hours the dom1 service on eth1
became inaccessible, not responding for either web or ssh access. eth0
on another provider's network remains up at this time. I can fix the
availability issue by ssh'ing to the eth0 side, then ssh from there to
dom1 (at 192.168.0.117) and then from the inside out ping any external
address, it doesn't seem to matter which one. Then the connections get
through and all is well for a while.
I have a workaround in place with this command:
watch -n 60 ping -c 1 uniserve.com
That's been running for two days and access from outside has been
uninterrupted.
I don't know where to start on this one. It could be a funny router
setup at the ISp's end or maybe the port (previously disused) on this
board is really flaky (but then why does pinging help?). The board,
fyi is a Tyan Thunder 3600m, S2932.
Ideas?
Dave
--
"It is no measure of health to be well adjusted to a profoundly sick society."
Krishnamurti
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
