I think my problem could be is how to create the iptables that could let the NFS server access into the host system.
The guest system is CentOS 5.3 i386 . The ip address is 192.168.56.101 with the eth0 interface
And the host system is CentOS 5.4 x86_64, its ip address is 192.168.7.67 and its route information is the following :
root@xxx: route -n
192.168.7.0 xx xx xx eth0
192.168.56.0 xx xx xxx vboxnet0
I run this iptable rule in the guest system which configured the NFS server,
iptables -A INPUT -i eth0 tcp -s 192.168.7.67 --dport 111 -j ACCEPT
Then :
when I run "showmount -e 192.168.56.101" and the directory appears,
but run the "mount -t nfs 192.168.56.101:/xxx /media" in the terminal ,
the output is still that message:
"mount : 192.168.56.101:/xx failed , reason given by server:Permission denied"
So is it my iptables rule wrong? Or how to write the correct the rule ?
Thanks in advance~.
On Mon, Apr 26, 2010 at 12:16 PM, onay <ronald.santosa@xxxxxxxxx> wrote:
> _______________________________________________On Mon, Apr 26, 2010 at 10:15 AM, sync <jiannma@xxxxxxxxx> wrote:
> Hi,guys:
>
> I am trying to connect to a NFS-filesystem on a CentOS 5.3 i386 guest
> system. The host system is CentOS 5.4 x86_64.
> I set up the NFS server correctly and rpcinfo is also ok inside the guest
> system show.
>
> The problem is, I can't connect to, or see the open port from the outside. I
> use the Host-Only network setup with VirtualBox 3.1.0,
> the ip address in the guest system is 192.168.56.101 . and the host system
> ip address is 192.168.7.67
>
> When I mount the directory from the guest system via NFS, the result is the
> following :
> "mount : 192.168.56.101:/xx failed , reason given by server:Permission
> denied"
>
> I hope one of you can give me a hint in which direction I should continue
> my efforts.
>
> Thanks in advance,,,
>
> CentOS mailing list
> CentOS@xxxxxxxxxx
> http://lists.centos.org/mailman/listinfo/centos
>
>
If you already can ping the nfs server, then you should check this:
1. nfsd service
2. open port on iptables
3. /etc/host.allow or /etc/host.deny
You can check share folder from nfs client with command:
showmount -e ip.nfs.server
If the folder appears, then you can start to mount that otherwise you
should check your /etc/exports again.
CMIIW.
--
If knowledge belong to the world,
why don't you give me some?
----------------------------------------------
http://dudulz.wordpress.com
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
_______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx http://lists.centos.org/mailman/listinfo/centos
