Re: Slightly OT: which hardware for CentOS file server (Samba, 2 To storage, 50 users)?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Gé Weijers wrote:
50 simultaneous users will require more than a bargain desktop PC.

I would go for low-end server hardware, which will get you ECC memory and more SATA ports. The cost is probably not significantly more than a _good_ quality desktop system.

You may want to allow for some expansion, 2 To may grow into 3 To over time. Also plan for backups. You may want to use LVM and leave some disk space unallocated to you can create snapshots and make backups to external USB drives or another network server while the system is up and running.

My personal criteria:
- decent power supply
- space for 4 3.5" hard drives.
- 4 memory slots, so I can go to 8 Go memory without breaking the bank
- at least a dual-core Xeon or AMD processor which supports ECC memory
- 4 or more available SATA ports on the motherboard
- 1-2 1000BASE-T network interfaces.

You could go for a RAID controller, but RAID1 (mirroring) has little overhead in software, and you can buy 2 extra hard disks for the price of the controller.
I'd support the above hardware as a minimum - it appears most will be reading, thus software RAID1 will work just fine - If there are many different files, I'd go for more smaller disks - say 8 by 500G in RAID1, thus the ability to spread the files over more spindles as this may become the bottleneck if all the files are on a single 2T drive.

Gé (from cloudy Nevada)


On Mon, 12 Apr 2010, Niki Kovacs wrote:

Hi,

The language lab from the local university has contacted me. They'd like
to have a low-cost file server for storing all their language video
files. They have a mix of Windows, Mac OS X and even Linux clients,
roughly 50 machines. The files are quite big, and they calculated a
total amount of 2 To of storage.

I'm not very proficient with hardware, meaning either I'm dealing with
remote servers in some datacenter, or otherwise I install CentOS
desktops on any hardware people throw at me.

Since the aim is lowcost, would it be wrong to install that fileserver
on a no-name desktop PC with a 64bit processor and enough RAM, and then
simply put 2 x 2 To hard disks in it, either with a mirroring RAID (can
never remember which does what in 0, 1 and 5) or some rsync script
regularly copying over the first disk to the second? Or do you have
something more apt to suggest?

Cheers from South France,

Niki
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos


_______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx http://lists.centos.org/mailman/listinfo/centos
begin:vcard
fn:Rob Kampen
n:Kampen;Rob
email;internet:rob@xxxxxxxxxxxxxxxxx
tel;cell:407-341-3815
version:2.1
end:vcard

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux