Re: NAT/DHCP/DNS/etc Settings from a Windows 2003 Server

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



I would try to launch a tcpdump/wireshark session on centos server to see whether there's dhcp traffic on it. Alternatively, when in static configuration, to see whether the icmp packets reach for NAT server (my feeling is they are not).

AFAIK, there is no limitation (or there should be none) on the 2k3 server. But of course, I could be wrong.

As a side note: I assume you also set the default gateway (as your nat server) and/or default route (through it) when in static configuration, not only the static ip.


Calin

Key fingerprint = 37B8 0DA5 9B2A 8554 FB2B 4145 5DC1 15DD A3EF E857

=================================================
I will follow the good side right to the fire, but not into it if I can help it. -- Michel Eyquem de Montaigne
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux