Re: apcupsd

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



m.roth@xxxxxxxxx wrote:
> Here's an odd one: I installed apcupsd, and it works with most of our
> UPSs. I'd swear it worked on this one. Then I replaced the Gin-u-wine APC
> batteries, which were dead, with new ones, non-APC. They're just dumb
> batteries, no chips or whatever on them.
>
> If I hook it up using a serial cable, I can get info. If I hook it up the
> way I had it, with APC's weird USB cable - and this is the way it was
> working before - it fails. I run apctest, and it gives me:
>
> Attached to driver: usb
> sharenet.type = DISABLE
> cable.type = USB_CABLE
>
> You are using a USB cable type, so I'm entering USB test mode
> mode.type = USB_UPS
> Setting up the port ...
> Hello, this is the apcupsd Cable Test program.
> This part of apctest is for testing USB UPSes.
>
> Getting UPS capabilities...SUCCESS
>
> Then I tell it to do the self test, and get:
>
> This test instructs the UPS to perform a self-test
> operation and reports the result when the test completes.
>
> Clearing previous self test result...CLEARED
> Initiating self test...INITIATED
> Waiting for test to complete...ERROR READING STATUS
> 12.976 apcupsd: linux-usb.c:802 HIDIOCGREPORT for function SelftestStatus
> failed. ERR=Input/output error
>
> Now, I've even found an rpm that was *not* two+ years old, as what comes
> with CentOS 5.4, current update, and get the same error.
>
> In addition, even though the batteries are fully charged, and the info I
> get via the serial cable says they're at 100%, the red "change battery"
> light is still on on the front of the UPS. Hitting the "test" button
> doesn't help; I was hoping running the self-test that's available via the
> USB connection would reset it, but I can't do that.
>
> Any clues for the poor?
>
>              mark
>
>   
Funny, after reading the above, I decided to try the apcupsd with my new 
fancy APC with the LCD display and everything. Got very similar results. 
Gnome Power Manager recognizes it from the get go, just with decreased 
functionality. It would be nice to have Centos able to 'plug' into all 
of its features and diagnostics. I'm  running 5.4 on a hardware raid 10 
server....old Adaptec 2400A with 128 megs of cache. This machine seems 
to have problems with the partition managers as well. Could LVM be 
getting in the way somehow?

Ed

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux