Re: /proc/mounts always shows "nobarrier" option for xfs, even when mounted with "barrier"

[Ross Walker <rswwalker@xxxxxxxxx>]

On Jan 21, 2010, at 4:04 PM, Tom Georgoulias <tomg@xxxxxxxxxxxxxxxxxxxxxxxx 
 > wrote:

> Ran into a confusing situation today.  When I mount an xfs  
> filesystem on
> a server running centos 5.4 x86_64 with kernel 2.6.18-164.9.1.el5, the
> barrier/nobarrier mount option as displayed in /proc/mounts is always
> set to "nobarrier"
>
> Here's an example:
> [root@host ~]# mount -o nobarrier /dev/vg1/homexfs /mnt
> [root@host ~]# grep xfs /proc/mounts
> /dev/vg1/homexfs /mnt xfs rw,attr2,nobarrier,noquota 0 0
> [root@host ~]# mount | grep xfs
> /dev/mapper/vg1-homexfs on /mnt type xfs (rw,nobarrier)
>
> [root@host ~]# mount -o barrier /dev/vg1/homexfs /mnt
> [root@host ~]# grep xfs /proc/mounts
> /dev/vg1/homexfs /mnt xfs rw,attr2,nobarrier,noquota 0 0
> [root@host ~]# mount | grep xfs
> /dev/mapper/vg1-homexfs on /mnt type xfs (rw,barrier)
>
> Can anyone else confirm this behavior?

LVM doesn't support barriers.

-Ross

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos