On 01/07/2010 05:28 PM, Joseph L. Casale wrote: > An often overlooked issue is the rebuild time with Linux software raid and > all hw raid controllers I have seen. On large drives the times are so long > as a result of the sheer size, if the array is degraded you are exposed during > the rebuild. As a point of reference: On a SIL3512 SATA interface, mdraid raid1, 2 x 1 TB disks take just under 6 hrs to resync with moderate load ( this machine is a mailserver off a 5mbps link to the internet, and rarely hits > 0.3 load with just usage. same machine with zero load and the mdadm resync rate bumped to 800000K/sec, it takes just over 3 hrs 42 min. But dont expect to be able to do anything with the machine during this time. ( I've just done these two syncs today! ) Disks are all : SAMSUNG HD103UJ , and are at 83% data space used of total capacity. - KB _______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx http://lists.centos.org/mailman/listinfo/centos