Peter
On Wed, Dec 16, 2009 at 12:58 PM, Craig White <craigwhite@xxxxxxxxxxx> wrote:
----On Wed, 2009-12-16 at 13:44 -0700, Craig White wrote:
> On Wed, 2009-12-16 at 12:39 -0800, Peter Serwe wrote:
> > I think not as well. The tactest user has been blown back out. I can
> > re-add it from ldif again.
> >
> > [root@ldap home]# getent passwd | grep example
> > [root@ldap home]#
> >
> > [root@ldap home]# cat /etc/nsswitch.conf | grep -v \#
> >
> >
> > passwd: files ldap
> > shadow: files ldap
> > group: files ldap
> >
> > hosts: files dns
> >
> >
> > bootparams: nisplus [NOTFOUND=return] files
> >
> > ethers: files
> > netmasks: files
> > networks: files
> > protocols: files
> > rpc: files
> > services: files
> >
> > netgroup: nisplus
> >
> > publickey: nisplus
> >
> > automount: files nisplus
> > aliases: files nisplus
> >
> > [root@ldap home]# cat /etc/pam.d/system-auth
> > #%PAM-1.0
> > # This file is auto-generated.
> > # User changes will be destroyed the next time authconfig is run.
> > auth required pam_env.so
> > auth sufficient pam_unix.so nullok try_first_pass
> > auth requisite pam_succeed_if.so uid >= 500 quiet
> > auth sufficient pam_ldap.so use_first_pass
> > auth required pam_deny.so
> >
> > account required pam_unix.so broken_shadow
> > account sufficient pam_localuser.so
> > account sufficient pam_succeed_if.so uid < 500 quiet
> > account [default=bad success=ok user_unknown=ignore] pam_ldap.so
> > account required pam_permit.so
> >
> > password requisite pam_cracklib.so try_first_pass retry=3
> > password sufficient pam_unix.so md5 shadow nullok try_first_pass
> > use_authtok
> > password sufficient pam_ldap.so use_authtok
> > password required pam_deny.so
> >
> > session optional pam_keyinit.so revoke
> > session required pam_limits.so
> > session optional pam_mkhomedir.so
> > session [success=1 default=ignore] pam_succeed_if.so service in
> > crond quiet use_uid
> > session required pam_unix.so
> > session optional pam_ldap.so
> >
> > [root@ldap home]# cat /etc/ldap.conf | grep -v \#
> >
> >
> > BASE dc=tncionline, dc=net
> > URI ldap://MailScanner warning: numerical links are often malicious:
> > 127.0.0.1
> > port 389
> >
> > SIZELIMIT 12
> > TIMELIMIT 15
> > DEREF never
> > timelimit 600
> > bind_timelimit 600
> > bind_policy soft
> > idle_timelimit 3600
> >
> > nss_initgroups_ignoreusers
> > pserwe,dgates,root,ldap,named,avahi,haldaemon,dbus
> > base dc=tncionline, dc=net
> > pam_password md5
> ----
> here's a big problem... /etc/ldap.conf
>
> you need to add...(assuming this is where you have People/Groups)
>
> nss_base_passwd ou=People,tncionline,dc=net?one
> nss_base_shadow ou=People,tncionline,dc=net?one
> nss_base_group ou=Groups,tncionline,dc=net?one
>
> take the space out of base...
> base dc=tncionline,dc=net
>
> I'd also add (until you can deal)...
> ssl no
oh...
you can remove pserwe,dgates from the list unless you have daemon services running as those users prior to LDAP start (highly unlikely)
nss_initgroups_ignoreusers
pserwe,dgates,root,ldap,named,avahi,haldaemon,dbus
and if the above doesn't work, it is because your slapd.conf ACL's are blocking anonymous binds at the indicated dn's
So you might want to either simplify your ACL's, permit anonymous binds to the 'people/groups' or let us see what you've got for ACL's
these are some rules that I've found good to have in /etc/openldap/slapd.conf - YMMV
allow bind_anon_dn
access to attrs=userPassword,sambaNTPassword,sambaLMPassword
by self write
by anonymous auth
by * none
access to dn.regex="^uid=([^,]+)ou=People,dc=azapple,dc=com$$"
by self read
by anonymous auth
by * none
# a bottom catchall rule...
access to *
by anonymous read
by * read
access to dn.base="cn=Subschema" by * read
Craig
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
--
Peter Serwe
http://truthlightway.blogspot.com/
_______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx http://lists.centos.org/mailman/listinfo/centos
