Rafa³ Radecki wrote: > What should I do? Where to start from to solve the problem? Simple - use CentOS 5. If your really wanting to use CentOS 4 run it in a VM, or build a custom driver disk after compiling the right drivers against the kernel used during installation, this process can be quite complicated, but it is possible I did it several times, there are instructions online on how to do it. nate _______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx http://lists.centos.org/mailman/listinfo/centos
Re: HP Proliant ML G6 problem.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- To: centos@xxxxxxxxxx
- Subject: Re: HP Proliant ML G6 problem.
- From: "nate" <centos@xxxxxxxxxxxxxxxx>
- Date: Sat, 31 Oct 2009 06:34:31 -0700 (PDT)
- Delivered-to: centos@xxxxxxxxxx
- Importance: Normal
- In-reply-to: <b60fba160910310532w35583ea6t98097b8ce2c39a36@xxxxxxxxxxxxxx>
- References: <b60fba160910310532w35583ea6t98097b8ce2c39a36@xxxxxxxxxxxxxx>
- User-agent: SquirrelMail/1.4.9a
- Follow-Ups:
- Re: HP Proliant ML G6 problem.
- From: Rafał Radecki
- Re: HP Proliant ML G6 problem.
- References:
- HP Proliant ML G6 problem.
- From: Rafał Radecki
- HP Proliant ML G6 problem.
- Prev by Date: No entry in /var/log/boot.log
- Next by Date: Re: HP Proliant ML G6 problem.
- Previous by thread: HP Proliant ML G6 problem.
- Next by thread: Re: HP Proliant ML G6 problem.
- Index(es):
 |