Boot to linux, and type memtest86 let it run for about 10 or 20 minutes with the ram that you have installed
Typically anything over 6 errors on a 512 stick will bring mayhem to an OS,
I am using a Failing ram stick on mine, becuase It is a dev machine that I hit with viruses and then reboot, and then the process starts over again.
Mainly testing all of these exploits that are on webservers running CentOS in a virtual environment. Its better to know what they do and how they get there
then to simply delete the file and hope for the best.
But I would seriously look at the memtest option, and possibly even the power supply for your answers. Chances are the PSU may be spiking or the memory may be bad in some of the upper blocks and X tends to use a bit of that memory.
have you tried getting KDE to run?
On Sun, Sep 27, 2009 at 8:42 PM, Buz Davis <buzdavis@xxxxxxxxxxxxx> wrote:
First, let me apologize to Akemi Yagi for my delay in answering his
last query. After failing with 4.8 I realized that I had at least one
and possibly two computers capable of handling 5.3 (one was newly
purchased second-hand and had many unknowns about it. The other was
well documented but its power was obscured by a thick layer of Windows XP).
To answer Akemi's last questions, yes, I am sure that the disks were all
4.8. I checked with md5sum before burning the cds
and am not sure how to check further than that. I never got past using
the first (modified) disk that I downloaded from the url you gave me,
because anaconda failed to find a file - having to do with GNOME,
so the process aborted. Again I apologize for delaying my response, but
I have been occupied again with 5.3, but on the newer computers.
5.3 installed easily and correctly on the first machine (celeron,
1.2Ghz, 512M ram, 80G disk). With the second machine I am getting
consistent failure to load X, despite
many attempts that appeared to be good installs.
For the last attempt I had about 160G of disk available,
over 800M of ran, and (as reported by the BIOS, a pentium 3 processor.
Unfortunately a remaining big unknown for that system is the Mhz rating
for the processor. When I got it, with a broken XP system on it, it was
set at 550Mhz. The BIOS allows three choices: 366, 500, and 7xx (I
don't remember the last value precisely, but the system wont boot at
all, so it's moot). I have mainly messed with the 550 setting, but have
occasionally tried at 360. It doesn't seem to make a difference.
On that system the output of uname -a gives
2.6.18-128.3l5 for the kernel, and "i686 i686 i386" at the end. Free
shows 905240 total and 231688 used.
Console mouse services work. When I attempt to load X I get the
hollow-x cursor, then the black screen with the nautilus window and then
white bars at top and bottom, along with an arrow cursor. The white
bars get populated with some icons
and then comes the blue screen with the doily-like design, but at that
point the system appears to be hung. The computer, home, and trash
icons do not appear on the desktop, nor does a mouse-pointer, and
wiggling the mouse does nothing.
I have compared the /var/log/Xorg.0.log files from the two machines (one
that works, one that doesn't), and they both end in the same place:
<snip>
(--) <default pointer>: PnP-detected protocol: "ExplorerPS/2"
(II) <default pointer>: ps2EnableDataReporting: succeeded
<eof>
I would appreciate any help in getting X to work on this second computer
Thanks,
Buz Davis
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
_______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx http://lists.centos.org/mailman/listinfo/centos
