Re: problem with udev when booting kernel 5.3 release 128.4.1 - solved - kinda

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Rob Kampen wrote:
Michael Klinosky wrote:
Rob Kampen wrote:
I am running a 64 bit 5.3 kernel on an intel mb and all has been well.
Today I thought it would be okay to reboot so that the latest kernel was running - i.e move from 128.2.1 to 128.4.1 release. The system passes POST fine, grub passes control to the 128.4.1 kernel and the boot process is under way.
after some 30 secs the system starts beeping - continuously.
After I hooked up a monitor I find that udev does not come up with OK and thats when the system starts the beep beep beep ......
No logs to see ......
using grub to select 128.2.1 boot fine
Any ideas?

I just upgraded the kernel also, and I'm having the same problem (except that my screen goes blank).

I noticed that Interactive mode allows the system to boot.

So, I'm wondering how to revert to the penultimate kernel. I tried to find info - all I got was
rpm -e kernel-oldversion
Would that make the system drop to the next-to-most-recent?

I saw a few mentions of using grub - but I set the timeout to 0 (but I don't use that screen, so I don't even see it now). If this method is a permanent fix, should I set it so that it comes up on the next boot?

[mykolas@sr1220 ~]$ uname -r
2.6.18-128.4.1.el5
[mykolas@sr1220 ~]$ rpm -q kernel
kernel-2.6.18-128.el5
kernel-2.6.18-128.1.16.el5
kernel-2.6.18-128.4.1.el5

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
Michael,
My screen goes blank too. It shows that it is starting udev but never comes up with the [OK] - just blanks the screen and beeps..... You may need to edit /boot/grub/grub.conf as root or via sudo and alter timeout or set default=1 or whatever number kernel you want - remember grub counts from 0.
I haven't tried interactive - will do that tonight.
HTH
Rob
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
Never did get the 4.1 kernel to work but the 7.1 kernel works just fine ...... Go figure
begin:vcard
fn:Rob Kampen
n:Kampen;Rob
email;internet:rkampen@xxxxxxxxxxxxxxxxx
tel;work:407-896-9556 x6344
tel;fax:407-896-7607
tel;home:407-876-4854
tel;cell:407-341-3815
version:2.1
end:vcard

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux