Re: Centos 5.3, no AHCI on HP DL320 G5p?

[Veiko Kukk <veiko.kukk@xxxxxxxxxxxxxxx>]

chandlercody@xxxxxxxxx wrote:
> I had to disable it with ahci=no at boot time, have you tried ahci=yes at boot time of kernel?
> ------Original Message------
> From: Ned Slider
> Sender: centos-bounces@xxxxxxxxxx
> To: CentOS mailing list
> ReplyTo: CentOS mailing list
> Subject: Re:  Centos 5.3, no AHCI on HP DL320 G5p?
> Sent: Jul 27, 2009 5:23 AM
> 
> Veiko Kukk wrote:
>> I have one HP Proliant DL320 G5p, where for some reason, the AHCI mode 
>> is not enabled. According to server specs, it should have AHCI/NCQ 
>> capability, but ata_piix module gets loaded during bootup, not ahci module.
>> Any ideas how to enable AHCI mode?
>>
> 
> I'm not sure for this particular model server, but normally this is a 
> *BIOS* setting for the SATA controller.

There are no settings in BIOS for AHCI mode, it's only possible to 
choose between raid and sata controller mode, i have chosen sata mode.

--
Veiko
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos