Farkas' solution is exactly right. I have been banging my head against
this problem for a while now and it wasn't until I finally paced myself
and read carefully through the entire thread that I found this solution.
Here is the procedure spelled out a bit more precisely.
Get the CentOS 5.2 rpms of popt, rpm, rpm-libs, rpm-python and
rpm-build. Obviously you can use most any mirror and if you are using
i386 you should replace x86_64 with i386. I prefer to use RIT since its
my Alma Mater and they seem to have good bandwidth and keep older
versions.
# wget
http://mirrors.rit.edu/centos/5.2/os/x86_64/CentOS/popt-1.10.2-48.el5.x8
6_64.rpm
# wget
http://mirrors.rit.edu/centos/5.2/os/x86_64/CentOS/rpm-4.4.2-48.el5.x86_
64.rpm
# wget
http://mirrors.rit.edu/centos/5.2/os/x86_64/CentOS/rpm-build-4.4.2-48.el
5.x86_64.rpm
# wget
http://mirrors.rit.edu/centos/5.2/os/x86_64/CentOS/rpm-libs-4.4.2-48.el5
.i386.rpm
# wget
http://mirrors.rit.edu/centos/5.2/os/x86_64/CentOS/rpm-python-4.4.2-48.e
l5.x86_64.rpm
It took some testing but because we are rolling back several packages
RPM handled the dependencies a little weird but here's the rpm command
that does all the magic.
# rpm -Uvh --oldpackage --nodeps popt-1.10.2-48.el5.x86_64.rpm
rpm-4.4.2-48.el5.x86_64.rpm rpm-libs-4.4.2-48.el5.i386.rpm
rpm-python-4.4.2-48.el5.x86_64.rpm
--nodeps is required because rpm complains about needing to fill some
dependencies for 4.4.2-48 but we are in fact trying to install those
very dependencies so we have to tell rpm not to bother.
If you are concerned throw in a --test switch to make sure everything
goes well. I never like using rpm to roll back rpm, just seems
dangerous, like crossing the streams.
After rolling back to the CentOS 5.2 versions of popt, rpm, rpm-libs and
rpm-python I am able to successfully init the epel-5-i386 mock root. I
tested several times and made sure to clear the build root and yum
caches in my tests.
Farkas' suggested this might be a bug in rpm or popt which seems to hold
true. Clearly between point releases something changed that caused rpm
to behave slightly differently when it comes to ordering transactions.
I am comfortable now using the slightly outdated RPMs but I wonder what
will happen in CentOS 5.4/5.5 and so on.
Regards,
-Alan
KEYWORDS: mock 0.9.14, CentOS 5.3, coreutils 5.97, pam 0.99.6.2
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
