Re: df -h shows system at 100% used, but there is space left

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



> Has anyone seen output like this before? Notice on my 
> /dev/md0 That it reports 100% used, but also 5.3 Gb 
> available. What would cause this?
> 
> 
> 
> # df -h
> Filesystem            Size  Used Avail Use% Mounted on
> /dev/sda2              71G  1.6G   66G   3% /
> /dev/sda1              99M   22M   73M  23% /boot
> tmpfs                 506M     0  506M   0% /dev/shm
> /dev/md0              903G  851G  5.3G 100% /home

I've never run into the reserved blocks being an issue (even though it
may be the case here). I have run out of inodes (one per file, and if
you have a ton of little files...). Run df -i to see what percent inodes
your using. 

Wikipedia has a good explaination of inodes
(http://en.wikipedia.org/wiki/Inode).
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux