I installed Centos 5.2 on a brand new computer the other day. It has an AsusDVD RW drive in it which I used to boot the netboot disk off of to install theoperating system so it found the dvd at that point.
Now k3b tells me that it can't find any drives.
[nathalie@jeff ~]$ ll /dev/scd0brw------- 1 nathalie disk 11, 0 Mar 10 14:00 /dev/scd0[nathalie@jeff ~]$ ll /dev/cdrom*lrwxrwxrwx 1 root root 4 Mar 10 14:00 /dev/cdrom -> scd0lrwxrwxrwx 1 root root 4 Mar 10 14:00 /dev/cdrom-sr0 -> scd0[nathalie@jeff ~]$ ll /dev/dvd*lrwxrwxrwx 1 root root 4 Mar 10 14:00 /dev/dvd -> scd0lrwxrwxrwx 1 root root 4 Mar 10 14:00 /dev/dvdrw -> scd0lrwxrwxrwx 1 root root 4 Mar 10 14:00 /dev/dvdrw-sr0 -> scd0lrwxrwxrwx 1 root root 4 Mar 10 14:00 /dev/dvd-sr0 -> scd0lrwxrwxrwx 1 root root 4 Mar 10 14:00 /dev/dvdwriter -> scd0lrwxrwxrwx 1 root root 4 Mar 10 14:00 /dev/dvdwriter-sr0 -> scd0
cdrecord --scanbus tells me this:
1,0,0 100) * 1,1,0 101) '��������' '����������������' '����' Removable vendorspecific 7 unknown/no device 1,2,0 102) * 1,3,0 103) * 1,4,0 104) * 1,5,0 105) * 1,6,0 106) * 1,7,0 107) *
/var/log/messages tells me this:
Mar 10 13:06:22 jeff kernel: sd 1:0:0:0: Attached scsi disk sdaMar 10 13:06:22 jeff kernel: Vendor: ASUS Model: DRW-20B1ST Rev: 1.00Mar 10 13:06:22 jeff kernel: Type: CD-ROM ANSI SCSI revision: 05
dmesg tells me this:
sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda trayUniform CD-ROM driver Revision: 3.20sr 1:0:1:0: Attached scsi CD-ROM sr0
What am I doing wrong here?
-- MELVILLE THEATRE ~ Melville Sask ~ http://www.melvilletheatre.com_______________________________________________CentOS mailing listCentOS@xxxxxxxxxxxxxx://lists.centos.org/mailman/listinfo/centos
