On Thu, 2009-02-26 at 06:34 -0500, William L. Maltby wrote: > <snip> > As to the OP original question, check BIOS settings and make sure your > serial is enabled. Set it to COM 3 and IRQ 4 should work. This would s/COM 3/COM 1/ # Drat! More JAVA, more JAVA! > equate to "0" in an *IX system. > > Look in your /var/log/messages file. At boot, you should see the device > recognized. > <snip> -- Bill _______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx http://lists.centos.org/mailman/listinfo/centos
Re: Need to test serial port connection
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- To: CentOS mailing list <centos@xxxxxxxxxx>
- Subject: Re: Need to test serial port connection
- From: "William L. Maltby" <CentOS4Bill@xxxxxxxxxxxx>
- Date: Thu, 26 Feb 2009 07:00:09 -0500
- Delivered-to: centos@xxxxxxxxxx
- In-reply-to: <1235648085.3973.23.camel@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- References: <200902261017.30127.cannewilson@xxxxxxxxxxxxxx> <1235646846.4501.4.camel@xxxxxxxxxxxxx> <1235648085.3973.23.camel@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- References:
- Need to test serial port connection
- From: Anne Wilson
- Re: Need to test serial port connection
- From: Phil Schaffner
- Re: Need to test serial port connection
- From: William L. Maltby
- Need to test serial port connection
- Prev by Date: Re: Need to test serial port connection
- Next by Date: Re: Need to test serial port connection
- Previous by thread: Re: Need to test serial port connection
- Next by thread: Re: Need to test serial port connection
- Index(es):
 |