Hi.
I configured a remote machine to allow network installation when the
machine is being loaded with PXE.
I'm using an x86_64 desktop.
The installation is almost fully automated with a kickstart file.
I enabled PXE in the BIOS, started the installation and in the middle of
the installation, i got a crash which reported an error.
I opened a bug on this issue:
http://bugs.centos.org/view.php?id=3394.
Someone, called Tru, kindly gave me the following answer:
from your logs:
File "/usr/lib/anaconda/iw/progress_gui.py", line 243, in
renderCallback
self.intf.icw.nextClicked()
File "/usr/lib/anaconda/gui.py", line 1045, in handleRenderCallback
self.currentWindow.renderCallback()
IOError: [Errno 30] Read-only file system
...
which was caused by:
<4>hda: status timeout: status=0xd0 { Busy }
<4>ide: failed opcode was: unknown
<3>hda: no DRQ after issuing MULTWRITE_EXT
<4>ide0: reset: success
<4>hda: status timeout: status=0xd0 { Busy }
<4>ide: failed opcode was: unknown
<3>hda: no DRQ after issuing MULTWRITE_EXT
<4>ide0: reset: success
<4>hda: status timeout: status=0xd0 { Busy }
<4>ide: failed opcode was: unknown
...
<4>ide0: reset: success
<4>hda: status timeout: status=0xd0 { Busy }
<4>ide: failed opcode was: unknown
<4>end_request: I/O error, dev hda, sector 344757
<3>hda: no DRQ after issuing MULTWRITE_EXT
<4>hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
<4>ide: failed opcode was: unknown
<3>hda: drive not ready for command
....
4>hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
<4>ide: failed opcode was: unknown
<3>hda: drive not ready for command
<4>ide0: reset: success
<3>Aborting journal on device dm-0.
<2>ext3_abort called.
<2>EXT3-fs error (device dm-0): ext3_journal_start_sb: Detected aborted
journal
<2>Remounting filesystem read-only
Issue History
Date Modified Username Field Change
======================================================================
2009-02-17 11:30dotan_bar New Issue
2009-02-17 11:30dotan_bar File Added: bug_report.txt
2009-02-17 11:34dotan_bar File Added: default.ks
2009-02-17 11:35dotan_bar Note Added: 0008711
2009-02-17 12:20tru Note Added: 0008713
======================================================================
Reply
Forward
noreply@xxxxxxxxxx
to me
show details 2:21 PM (1 hour ago)
Reply
The following issue has been CLOSED
======================================================================
http://bugs.centos.org/view.php?id=3394
======================================================================
Reported By: dotan_bar
Assigned To:
======================================================================
Project: CentOS-5
Issue ID: 3394
Category: -OTHER
Reproducibility: unable to reproduce
Severity: crash
Priority: normal
Status: closed
Resolution: open
Fixed in Version:
======================================================================
Date Submitted: 2009-02-17 11:30 UTC
Last Modified: 2009-02-17 12:21 UTC
- Show quoted text -
======================================================================
Summary: There was a crash during the distribution
installation over PXE using kickstart
Description:
I configured a remote machine to allow network installation when the
machine is being loaded with PXE.
The installation is almost fully automated with a kickstart file.
I enabled PXE in the BIOS, started the installation and in the middle of
the installation, i got a crash which reported an error.
I'm using x86_64 desktop.
======================================================================
----------------------------------------------------------------------
dotan_bar - 2009-02-17 11:35
----------------------------------------------------------------------
I attached the kick-start file too.
----------------------------------------------------------------------
tru - 2009-02-17 12:20
----------------------------------------------------------------------
from your logs:
File "/usr/lib/anaconda/iw/progress_gui.py", line 243, in
renderCallback
self.intf.icw.nextClicked()
File "/usr/lib/anaconda/gui.py", line 1045, in handleRenderCallback
self.currentWindow.renderCallback()
IOError: [Errno 30] Read-only file system
...
which was caused by:
<4>hda: status timeout: status=0xd0 { Busy }
<4>ide: failed opcode was: unknown
<3>hda: no DRQ after issuing MULTWRITE_EXT
<4>ide0: reset: success
<4>hda: status timeout: status=0xd0 { Busy }
<4>ide: failed opcode was: unknown
<3>hda: no DRQ after issuing MULTWRITE_EXT
<4>ide0: reset: success
<4>hda: status timeout: status=0xd0 { Busy }
<4>ide: failed opcode was: unknown
...
<4>ide0: reset: success
<4>hda: status timeout: status=0xd0 { Busy }
<4>ide: failed opcode was: unknown
<4>end_request: I/O error, dev hda, sector 344757
<3>hda: no DRQ after issuing MULTWRITE_EXT
<4>hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
<4>ide: failed opcode was: unknown
<3>hda: drive not ready for command
....
4>hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
<4>ide: failed opcode was: unknown
<3>hda: drive not ready for command
<4>ide0: reset: success
<3>Aborting journal on device dm-0.
<2>ext3_abort called.
<2>EXT3-fs error (device dm-0): ext3_journal_start_sb: Detected aborted
journal
<2>Remounting filesystem read-only
----------------------------------------------------------------------
tru - 2009-02-17 12:21
----------------------------------------------------------------------
OP hardware error, not a bug.
This is not a support system, but a bug tracker. Please take your
questions to either the centos mailing list or the forums.
Can anyone help me with this issue?
Thanks
Dotan
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
