I finally had a eureka moment this morning and figured out the issues.
Our Centos 5 servers are all running on Sun x4100 hardware which has a
service processor that runs a firmware Debian install. Since the console
for the Centos 5 server is effectively the same console as the service
processor, what we were really seeing was the service processor init
complaining. Once I figured that out it was easy enough to confirm.
Thanks for your time.
David Halik wrote:
> Thanks for the reply. I've tried both "init q" and "init u" without any
> luck, the message still appeared five minutes later. Init did post a
> message that it was reloaded, so the command worked, yet the process is
> still complaining about this "snmp" id.
>
> Here's my inittab. It's fairly standard and I don't think any custom
> changes were made.
>
> #
> # inittab This file describes how the INIT process should set up
> # the system in a certain run-level.
> #
> # Author: Miquel van Smoorenburg, <miquels@xxxxxxxxxxxxxxxxxxxxx>
> # Modified for RHS Linux by Marc Ewing and Donnie Barnes
> #
>
> # Default runlevel. The runlevels used by RHS are:
> # 0 - halt (Do NOT set initdefault to this)
> # 1 - Single user mode
> # 2 - Multiuser, without NFS (The same as 3, if you do not have
> networking)
> # 3 - Full multiuser mode
> # 4 - unused
> # 5 - X11
> # 6 - reboot (Do NOT set initdefault to this)
> #
> id:3:initdefault:
>
> # System initialization.
> si::sysinit:/etc/rc.d/rc.sysinit
>
> l0:0:wait:/etc/rc.d/rc 0
> l1:1:wait:/etc/rc.d/rc 1
> l2:2:wait:/etc/rc.d/rc 2
> l3:3:wait:/etc/rc.d/rc 3
> l4:4:wait:/etc/rc.d/rc 4
> l5:5:wait:/etc/rc.d/rc 5
> l6:6:wait:/etc/rc.d/rc 6
>
> # Trap CTRL-ALT-DELETE
> ca::ctrlaltdel:/sbin/shutdown -t3 -r now
>
> # When our UPS tells us power has failed, assume we have a few minutes
> # of power left. Schedule a shutdown for 2 minutes from now.
> # This does, of course, assume you have powerd installed and your
> # UPS connected and working correctly.
> pf::powerfail:/sbin/shutdown -f -h +2 "Power Failure; System Shutting Down"
>
> # If power was restored before the shutdown kicked in, cancel it.
> pr:12345:powerokwait:/sbin/shutdown -c "Power Restored; Shutdown Cancelled"
>
>
> # Run gettys in standard runlevels
> co:2345:respawn:/sbin/agetty ttyS0 9600 vt100-nav
> 1:2345:respawn:/sbin/mingetty tty1
> 2:2345:respawn:/sbin/mingetty tty2
> 3:2345:respawn:/sbin/mingetty tty3
> 4:2345:respawn:/sbin/mingetty tty4
> 5:2345:respawn:/sbin/mingetty tty5
> 6:2345:respawn:/sbin/mingetty tty6
>
> # Run xdm in runlevel 5
> x:5:respawn:/etc/X11/prefdm -nodaemon
>
>
>
> Filipe Brandenburger wrote:
>
>> Hi,
>>
>> On Tue, Feb 10, 2009 at 14:23, David Halik <dhalik@xxxxxxxxxxxxxxx> wrote:
>>
>>
>>> INIT: Id "snmp" respawning too fast: disabled for 5 minutes
>>> INIT: Id "snmp" respawning too fast: disabled for 5 minutes
>>> INIT: Id "snmp" respawning too fast: disabled for 5 minutes
>>>
>>>
>> What does "grep -i snmp /etc/inittab" say?
>>
>> If there is really nothing, try "init q" to see if init is still using
>> old contents of that file. If that does not help, try "init u" as
>> well.
>>
>> If it still does not fix it, please post the full contents of your
>> inittab so that we can help you fix the problem.
>>
>> HTH,
>> Filipe
>> _______________________________________________
>> CentOS mailing list
>> CentOS@xxxxxxxxxx
>> http://lists.centos.org/mailman/listinfo/centos
>>
>>
>
>
>
--
================================
David Halik
System Administrator
OIT-CSS Rutgers University
dhalik@xxxxxxxxxxxxxxx
================================
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
