Re: After electric breaking: HARDWARE ERROR Kernel panic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On Fri, Feb 13, 2009 at 3:35 AM, John R Pierce <pierce@xxxxxxxxxxxx> wrote:
> Vnpenguin wrote:
>> After an electric breaking, my server (Centos 5.2 x86_64 with all
>> updates) can not boot. The error message on screen is:
>> Memory for crash kernel (0x0 to 0x0) notwithin permissible range
>> <0>
>> HARDWARE ERROR
>> CPU 1: Machine Check Exception:   7 Bank 4: ....
>> RIP 10:<.....>
>> TSC 133eab63c9 ADDR 24fe3d028
>> This is not a software problem!
>> Run through mcelog --ascii to decode and contact your hardware vendot
>> Kernel panic - not syncing: Uncorrected machine check

> you have a hardware problem.   something fried on the motherboard,
> possibly the ram, maybe something else..   if the server is on some sort
> of service contract or warranty, call the hardware or support vendor.
> if not, find someone skilled at troubleshooting x86_64 server hardware.
<snip>
I doubt a warranty will cover electrical damage, but you can ask.....
 An insurance policy is more likely to cover this.  :-)    Run
Diagnostics on the RAM (which is the reported error) and your
motherboard.  The PSU may also be damaged. Run Diagnostics on the hard
drives, after you get it up and running.
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux