Re: smartd and 3ware 9xxx configs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On Wed, Feb 11, 2009 at 12:17:09PM -0500, Joshua Baker-LePain wrote:
> On Tue, 10 Feb 2009 at 9:42pm, Jim Perrin wrote
> 
> > I'm looking to do a bit more monitoring of my 3ware 9550 with smartd,
> > and wanted to see what others were doing with smart for monitoring
> > 3ware hardware.
> >
> > Do you have the smartd.conf configured to test, or simply monitor health status?
> > Are you monitoring the drive as centos sees it (/dev/sdX) or are you
> > using the 3ware /dev/twaX for monitoring?
> >
> > Opinions and discussions are welcome :-P
> 
> Have you thought about tying tw_cli into nagios?  That's one of my 
> round-tuit projects.  I'm sure there are already plugins for it, and it 
> seems like you may get better info.

On a somewhat related note.  I haven't yet looked into what 3ware does
on the SNMP side.  Does it include a MIB file?  Anyone generating traps
on bad disk events?

Not hard to set up your own OID to run a shell script to check disk
status, but traps are cooler. :)

Ray
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux