Re: More than 2TB RAID...

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



From: Peter Kjellstrom <cap@xxxxxxxxxx>
> If it does raid6 then you have a p400 or p800 controller, right? If so then 
> hpacucli or similar can easily give you a small logical drive for the OS and 
> then a large one for data.

Yes, that's the plan but, the thing is to be able to run the utilities...
I need either to make a live CD with the HP tools installed, or a "temporary OS with the tools...
First try will be to create a RAID6 on 3 disks (=1 TB, so no grub problems), install the OS, run HP ACU, extend the RAID to the 12 disks, and create the logical disks...
If first try fails, second try would be to use a temporary USB disk to install a temporary OS.
I even thought of Installing the P800 in a model 3xx, while leaving the disks in the DL180 (if cable length permits it), and boot with SmartStart on the 3xx... ^_^
As for the logical disks sizes, we would go with something like 5 disks of 1.9TB.
So, just classic msdos partitions.
One thing is for sure, HP tries really hard to make it complicated...

JD


      

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux