Re: help with hdparm

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Jerry Geis wrote:
> I am running centos 5.2 i686.
>
> The /boot/config indicates that VIA82CXXXX is built into the kernel.
> CONFIG_BLK_DEV_VIA82CXXX=y
>
> my lspci -v gives
> 00:0f.0 IDE interface: VIA Technologies, Inc. CX700M2 IDE (prog-if 8a 
>   
...


those are two different chipsets, the CX700M2 is for the C4 family of 
ITX mini boards, while hte 82C7xxx stuff is their older northbridges for 
desktop systems...  

googling for that, I saw mention that Via has a linux patch for it, and 
apparently all it does is add a new PCI vendor/device ID so the existing 
drivers recognize the new chip.  you can probably find the CX700M2's PCI 
vendor/device ID with lspci(8)


_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux