CentOS 5.2 with IBM SERVERAID 6i

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



I need to install CentOS 5.2 on a IBM Server xSeries 226, which comes with a IBM SERVERAID 6i RAID card. I think it is not a true hardware RAID card. I has, nevertheless, an interesting feature: 128MB of cache with battery backup.

I launched the CentOS boot DVD and CentOS correctly identified the card and the RAID 5 array as configured by the controller's BIOS.

My question now is: what would be the better way to implement RAID 5 on this server? Should I use the detected array and respective driver or should I delete the array and go for Linus Software RAID?

If both solutions are in fact Software RAID, is there any particular reason to prefer one of the methods?

I know that Linux RAID will create a universal, more compatible array, readable on any Linux machine. But is there some other reason that makes it preferrable to use the SERVERAID driver provided by CentOS? Is it optimized in any way that recommends its use?

Will the controller still make use of its cache and battery backup if configured as a plain SCSI controller with Linux Software RAID?

I hope that some more experienced list member can ellucidate me on this.

Thank you!

PS - The machine is powered by a Intel P4 Xeon processor served by 2.5GB of RAM. The disks are 3 IBM 10K rpm SCSI 320 with 73 GB each.
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos


[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux