On Wed, 15 Oct 2008, Marcus Moeller wrote:
Hi all.
I have set up a DHCP server with multiple subnet configurations
(let's say subnet A and B). Within that I have declared pools and
static hosts addresses.
Now, if I have set up a static host entry (with fixed-address) in
Subnet B for a specific machine and try to connect to Subnet A with
that NIC (where it should obtain an address from the range), this
does not work unless I add a static host entry for that machine to
the Subnet A declaration, too. I even have to assign a
fixed-address, there.
I just want the NIC to clain it's address from the range on Subnet A
and to assign a fixed address on Subnet B.
You can assign multiple host blocks for the same NIC, using a
fixed-address directive in one but not in other. dhcpd will try for
the best match. If the request arrives from subnet-B, and the fixed
address is on that net, then that's the block that gets used.
Otherwise, the less specific block will be used. E.g.,
host myhost {
hardware ethernet 11:22:33:44:55:66;
fixed-address myhost.mydom.com;
}
host myhost-roam {
hardware ethernet 11:22:33:44:55:66;
}
--
Paul Heinlein <> heinlein@xxxxxxxxxx <> http://www.madboa.com/
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
