Gary wrote:
Hi Nate,
It is the same Linksys card that is already recognized. CentOS effectively
uses the Linksys as ADMTek NC100 for Linksys immediately recognized with
no problem. It just will not recognize this third card at all, not even
seeing it using lspci, which shows no Ethernet controller for the same 3rd
card ..
does LSPCI not even show the 3rd card?!?
each PCI device has A) a bus/card/function # (determined by the
motherboard slot and such), and B) a vendor/device ID # (hard coded on
the card)
a typical system...
# lspci
00:00.0 Host bridge: Broadcom CMIC-WS Host Bridge (GC-LE chipset) (rev 13)
00:00.1 Host bridge: Broadcom CMIC-WS Host Bridge (GC-LE chipset)
00:00.2 Host bridge: Broadcom CMIC-LE
00:04.0 Class ff00: Dell Embedded Remote Access or ERA/O
00:04.1 Class ff00: Dell Remote Access Card III
00:04.2 IPMI SMIC interface: Dell Embedded Remote Access: BMC/SMIC device
00:0e.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
00:0f.0 Host bridge: Broadcom CSB5 South Bridge (rev 93)
00:0f.1 IDE interface: Broadcom CSB5 IDE Controller (rev 93)
00:0f.2 USB Controller: Broadcom OSB4/CSB5 OHCI USB Controller (rev 05)
00:0f.3 ISA bridge: Broadcom CSB5 LPC bridge
00:10.0 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
00:10.2 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
00:11.0 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
00:11.2 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
01:06.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
01:06.1 Input device controller: Creative Labs SB Live! Game Port (rev 07)
01:08.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
01:08.1 Input device controller: Creative Labs SB Live! Game Port (rev 07)
02:06.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
02:06.1 Input device controller: Creative Labs SB Live! Game Port (rev 07)
03:06.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701
Gigabit Ethernet (rev 15)
03:08.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701
Gigabit Ethernet (rev 15)
04:08.0 PCI bridge: Intel Corporation 80303 I/O Processor PCI-to-PCI
Bridge (rev 01)
05:06.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
05:06.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
the first field is the bus.slot.func number. on this particular server,
bus 00, 03, 04, and 05 are on the mainboard, while busses 01 and 2 are
actual PCI slots, this machine actually has 3 SB Live cards plugged into
it as its a sound processor. bus 03 device 06 and 08 are the onboard
broadcom ethernet controllers.
this i the same system shown in numeric form...
# lspci -n
00:00.0 0600: 1166:0012 (rev 13)
00:00.1 0600: 1166:0012
00:00.2 0600: 1166:0000
00:04.0 ff00: 1028:000c
00:04.1 ff00: 1028:0008
00:04.2 0c07: 1028:000d
00:0e.0 0300: 1002:4752 (rev 27)
00:0f.0 0600: 1166:0201 (rev 93)
00:0f.1 0101: 1166:0212 (rev 93)
00:0f.2 0c03: 1166:0220 (rev 05)
00:0f.3 0601: 1166:0225
00:10.0 0600: 1166:0101 (rev 03)
00:10.2 0600: 1166:0101 (rev 03)
00:11.0 0600: 1166:0101 (rev 03)
00:11.2 0600: 1166:0101 (rev 03)
01:06.0 0401: 1102:0002 (rev 07)
01:06.1 0980: 1102:7002 (rev 07)
01:08.0 0401: 1102:0002 (rev 07)
01:08.1 0980: 1102:7002 (rev 07)
02:06.0 0401: 1102:0002 (rev 07)
02:06.1 0980: 1102:7002 (rev 07)
03:06.0 0200: 14e4:1645 (rev 15)
03:08.0 0200: 14e4:1645 (rev 15)
04:08.0 0604: 8086:0309 (rev 01)
05:06.0 0100: 9005:00cf (rev 01)
05:06.1 0100: 9005:00cf (rev 01)
for an example, 14e4 is broadcom's vendor ID and 14e4:1645 is the
broadcom bcm5701
these are what the OS actually works with, the vendor:device ID is
matched up with the device driver database
I hope this helps.
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
