On Wed, Sep 3, 2008 at 9:55 AM, Niki Kovacs <contact@xxxxxxxxxxxxx> wrote:
Mogens Kjaer a écrit :Sorry couldn't try this out earlier, as my wife went away for a few days with the laptop.
Take a close look at what gets logged into /var/log/messages
Anyway, here goes. To try it out, I stopped the 'network' service and started 'NetworkManager' as well as 'NetworkManagerDispatcher'. Laptop was not connected to any Ethernet cable. My home access point showed up (essid 'zuhause', no encryption). I clicked on it to try to establish a connection:
--8<----------------------------------------------------------------
[root@nordinou init.d]# tail -f /var/log/messages
Sep 3 16:32:39 nordinou NetworkManager: <information> User Switch: /org/freedesktop/NetworkManager/Devices/eth1 / zuhause
Sep 3 16:32:39 nordinou NetworkManager: <information> Deactivating device eth1.
Sep 3 16:32:39 nordinou dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth1 for sub-path eth1.dbus.get.reason
Sep 3 16:32:39 nordinou NetworkManager: <information> Device eth1 activation scheduled...
Sep 3 16:32:39 nordinou NetworkManager: <information> Activation (eth1) started...
Sep 3 16:32:39 nordinou NetworkManager: <information> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled...
Sep 3 16:32:39 nordinou NetworkManager: <information> Activation (eth1) Stage 1 of 5 (Device Prepare) started...
Sep 3 16:32:39 nordinou NetworkManager: <information> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled...
Sep 3 16:32:39 nordinou NetworkManager: <information> Activation (eth1) Stage 1 of 5 (Device Prepare) complete.
Sep 3 16:32:39 nordinou NetworkManager: <information> Activation (eth1) Stage 2 of 5 (Device Configure) starting...
Sep 3 16:32:39 nordinou NetworkManager: <information> Activation (eth1/wireless): access point 'zuhause' is unencrypted, no key needed.
Sep 3 16:32:39 nordinou NetworkManager: <information> SUP: sending command 'INTERFACE_ADD eth1 wext /var/run/wpa_supplicant '
Sep 3 16:32:39 nordinou NetworkManager: <information> SUP: response was 'OK'
Sep 3 16:32:39 nordinou NetworkManager: <information> SUP: sending command 'AP_SCAN 1'
Sep 3 16:32:39 nordinou NetworkManager: <information> SUP: response was 'OK'
Sep 3 16:32:39 nordinou NetworkManager: <information> SUP: sending command 'ADD_NETWORK'
Sep 3 16:32:39 nordinou NetworkManager: <information> SUP: response was '0'
Sep 3 16:32:39 nordinou NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 ssid 7a756861757365'
Sep 3 16:32:39 nordinou NetworkManager: <information> SUP: response was 'OK'
Sep 3 16:32:39 nordinou NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 key_mgmt NONE'
Sep 3 16:32:39 nordinou NetworkManager: <information> SUP: response was 'OK'
Sep 3 16:32:39 nordinou NetworkManager: <information> SUP: sending command 'ENABLE_NETWORK 0'
Enabling something with a value of zero looks suspicious to me....
Sep 3 16:32:39 nordinou NetworkManager: <information> SUP: response was 'OK'
Sep 3 16:32:39 nordinou NetworkManager: <information> Activation (eth1) Stage 2 of 5 (Device Configure) complete.
Sep 3 16:33:19 nordinou NetworkManager: <information> Activation (eth1/wireless): association took too long (>40s), failing activation.
Sep 3 16:33:19 nordinou NetworkManager: <information> Activation (eth1) failure scheduled...
Sep 3 16:33:19 nordinou NetworkManager: <information> Activation (eth1) failed for access point (zuhause)
Sep 3 16:33:19 nordinou NetworkManager: <information> Activation (eth1) failed.
Sep 3 16:33:19 nordinou NetworkManager: <information> Deactivating device eth1.
--8<----------------------------------------------------------------
Now I was curious about this, so I tried it on another machine, my Buildbox, that also has a wireless card. Similar failure:
--8<----------------------------------------------------------------
[root@buildbox ~]# tail -f /var/log/messages
Sep 3 16:35:52 buildbox dhcdbd: Started up.
Sep 3 16:35:53 buildbox NetworkManager: <information> starting...
Sep 3 16:35:53 buildbox NetworkManager: <WARNING> nm_system_device_get_system_config (): Network configuration for device 'wlan0' was invalid (non-DHCP configuration, but no gateway specified. Will use DHCP instead.
Sep 3 16:35:53 buildbox NetworkManager: <information> wlan0: Device is fully-supported using driver 'rt61'.
Sep 3 16:35:53 buildbox NetworkManager: <information> wlan0: driver does not support SSID scans (scan_capa 0x00).
Sep 3 16:35:53 buildbox NetworkManager: <information> nm_device_init(): waiting for device's worker thread to start
Sep 3 16:35:53 buildbox NetworkManager: <information> nm_device_init(): device's worker thread started, continuing.
Sep 3 16:35:53 buildbox NetworkManager: <information> Now managing wireless (802.11) device 'wlan0'.
Sep 3 16:35:53 buildbox NetworkManager: <information> Deactivating device wlan0.
Sep 3 16:35:53 buildbox kernel: eth0: link down
Sep 3 16:35:53 buildbox kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Sep 3 16:35:53 buildbox NetworkManager: <information> eth0: Device is fully-supported using driver '8139too'.
Sep 3 16:35:53 buildbox NetworkManager: <information> nm_device_init(): waiting for device's worker thread to start
Sep 3 16:35:53 buildbox NetworkManager: <information> nm_device_init(): device's worker thread started, continuing.
Sep 3 16:35:53 buildbox NetworkManager: <information> Now managing wired Ethernet (802.3) device 'eth0'.
Sep 3 16:35:53 buildbox NetworkManager: <information> Deactivating device eth0.
Sep 3 16:35:53 buildbox NetworkManager: <information> Updating allowed wireless network lists.
Sep 3 16:35:53 buildbox NetworkManager: <WARNING> nm_dbus_get_networks_cb (): error received: org.freedesktop.NetworkManagerInfo.NoNetworks - There are no wireless networks stored..
Sep 3 16:35:53 buildbox NetworkManager: <information> SWITCH: no current connection, found better connection 'eth0'.
Sep 3 16:35:54 buildbox dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.reason
Sep 3 16:35:54 buildbox NetworkManager: <information> Will activate wired connection 'eth0' because it now has a link.
Sep 3 16:35:54 buildbox dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.reason
Sep 3 16:35:54 buildbox NetworkManager: <information> Will activate connection 'eth0'.
Sep 3 16:35:54 buildbox NetworkManager: <information> Device eth0 activation scheduled...
Sep 3 16:35:54 buildbox NetworkManager: <information> Activation (eth0) started...
Sep 3 16:35:54 buildbox NetworkManager: <information> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled...
Sep 3 16:35:54 buildbox NetworkManager: <information> Activation (eth0) Stage 1 of 5 (Device Prepare) started...
Sep 3 16:35:54 buildbox NetworkManager: <information> Activation (eth0) failure scheduled...
Sep 3 16:35:54 buildbox NetworkManager: <information> Activation (eth0) Stage 1 of 5 (Device Prepare) complete.
Sep 3 16:35:54 buildbox NetworkManager: <information> Activation (eth0) failed.
Sep 3 16:35:54 buildbox NetworkManager: <information> Deactivating device eth0.
Sep 3 16:36:48 buildbox NetworkManager: <information> User Switch: /org/freedesktop/NetworkManager/Devices/wlan0 / zuhause
Sep 3 16:36:48 buildbox NetworkManager: <information> Deactivating device wlan0.
Sep 3 16:36:48 buildbox dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/wlan0 for sub-path wlan0.dbus.get.reason
Sep 3 16:36:48 buildbox NetworkManager: <information> Device wlan0 activation scheduled...
Sep 3 16:36:48 buildbox NetworkManager: <information> Activation (wlan0) started...
Sep 3 16:36:48 buildbox NetworkManager: <information> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Sep 3 16:36:48 buildbox NetworkManager: <information> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Sep 3 16:36:48 buildbox NetworkManager: <information> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Sep 3 16:36:48 buildbox NetworkManager: <information> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Sep 3 16:36:48 buildbox NetworkManager: <information> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Sep 3 16:36:48 buildbox NetworkManager: <information> Activation (wlan0/wireless): access point 'zuhause' is unencrypted, no key needed.
Sep 3 16:36:48 buildbox NetworkManager: <information> SUP: sending command 'INTERFACE_ADD wlan0 wext /var/run/wpa_supplicant '
Sep 3 16:36:48 buildbox NetworkManager: <information> SUP: response was 'OK'
Sep 3 16:36:48 buildbox NetworkManager: <information> SUP: sending command 'AP_SCAN 2'
Sep 3 16:36:48 buildbox NetworkManager: <information> SUP: response was 'OK'
Sep 3 16:36:48 buildbox NetworkManager: <information> SUP: sending command 'ADD_NETWORK'
Sep 3 16:36:48 buildbox NetworkManager: <information> SUP: response was '0'
Sep 3 16:36:48 buildbox NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 ssid 7a756861757365'
Sep 3 16:36:48 buildbox NetworkManager: <information> SUP: response was 'OK'
Sep 3 16:36:48 buildbox NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 key_mgmt NONE'
Sep 3 16:36:48 buildbox NetworkManager: <information> SUP: response was 'OK'
Sep 3 16:36:48 buildbox NetworkManager: <information> SUP: sending command 'ENABLE_NETWORK 0'
Sep 3 16:36:48 buildbox NetworkManager: <information> SUP: response was 'OK'
Sep 3 16:36:48 buildbox NetworkManager: <information> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Sep 3 16:37:08 buildbox NetworkManager: <information> Activation (wlan0/wireless): association took too long (>20s), failing activation.
Sep 3 16:37:08 buildbox NetworkManager: <information> Activation (wlan0) failure scheduled...
Sep 3 16:37:08 buildbox NetworkManager: <information> Activation (wlan0) failed for access point (zuhause)
Sep 3 16:37:08 buildbox NetworkManager: <information> Activation (wlan0) failed.
Sep 3 16:37:08 buildbox NetworkManager: <information> Deactivating device wlan0.
--8<----------------------------------------------------------------
Any idea why NetworkManager refuses to connect to my network?
Niki
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
Sep 3 16:32:39 nordinou NetworkManager: <information> SUP: sending command 'ENABLE_NETWORK 0'
looks like it would disable the network?
_______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx http://lists.centos.org/mailman/listinfo/centos
