Re: can't get Ethernet SNMP information

["Rudi Ahlers" <rudiahlers@xxxxxxxxx>]

On Wed, Aug 13, 2008 at 2:26 PM, Filipe Brandenburger <filbranden@xxxxxxxxx> wrote:

On Wed, Aug 13, 2008 at 04:00, Rudi Ahlers <rudiahlers@xxxxxxxxx> wrote:
> Unfortunately this didn't work. Although I could see a whole lot of MIB's
> now, Cacti still doesn't graph the network interface

I'm not an expert on Cacti, but... are you sure you configured the
proper interface name on it? Are you sure it is looking for, e.g.,
eth0?

>From the output, these are the interface names you have on your system:

+ Found item [ifName='lo'] index: 1 [from value]
+ Found item [ifName='peth0'] index: 2 [from value]
+ Found item [ifName='sit0'] index: 3 [from value]
+ Found item [ifName='vif0.0'] index: 4 [from value]
+ Found item [ifName='eth0'] index: 5 [from value]
+ Found item [ifName='vif0.1'] index: 6 [from value]
+ Found item [ifName='veth1'] index: 7 [from value]
+ Found item [ifName='vif0.2'] index: 8 [from value]
+ Found item [ifName='veth2'] index: 9 [from value]
+ Found item [ifName='vif0.3'] index: 10 [from value]
+ Found item [ifName='veth3'] index: 11 [from value]
+ Found item [ifName='xenbr0'] index: 15 [from value]
+ Found item [ifName='vif8.0'] index: 20 [from value]
+ Found item [ifName='vif9.0'] index: 21 [from value]
+ Found item [ifName='vifzsas0'] index: 25 [from value]

And these are the IPs assigned to eth0:

+ Found item [ifIP='192.168.10.11'] index: 5 [from regexp oid parse]
+ Found item [ifIP='196.34.136.110'] index: 5 [from regexp oid parse]

HTH,
Filipe
_______________________________________________

Well, that's the thing, in Cacti there' an option, "SMP Interface  Statistics" - which you need to enable first, and then select the different interfaces. It's supposed to list eth0 - xenbr0, and everything in between, but it doesn't.

--

Kind Regards
Rudi Ahlers

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos