Re: Re: usb to usb comm ports - possible? how?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



James B. Byrne wrote:
On Wed, July 30, 2008 15:14, James B. Byrne wrote:
I have an i686 mono core system configured as a CentOS-5.2 server.
It has one DB9P RS-232 serial connector and six USB connectors.
The DB9p is configured as STTY0 for the attached MultiTec MT5638ZBA
fax modem.  I would very much like to connect my MS WindowsXPpro
laptop, which only has USB connectors, to this server via telnet
or ssh over a direct connection.

On Wed Jul 30 20:19:44 UTC 2008, Les Mikesell lesmikesell at gmail.com wrote:
I can't imagine why anyone would want to do this on any system
capable of using a network connection instead.

The availability of the nic cannot be guaranteed since the machine is
being configured on one netblock and then being physically transferred to
a distant location. It is entirely possible that whatever IP address is
assigned to the eth0 connection here as being the one that will be used
there may not actually work on the target network.  The purpose of the
serial connection is to permit a laptop to substitute for a
monitor/kb/mouse on site in that eventuality.  If it proves too cumbersome
to enable direct host to host communications via usb then we will simply
ship a 15" flat screen, kb and mouse with the unit and have them returned
afterwards.

If you are confident that the server itself would be up and functional, you could configure an extra NIC with a private subnet that offers DHCP so a laptop plugged in with a crossover cable would be able to connect to a known address. It might even be possible to make that happen after a USB adapter is plugged in.

We could, I suppose, reconfigure the available serial port as a tty and
then connect that way, establish network connectivity, detach, and
reconfigure the DB9p as an STTY for the fax service.

Can't you just run one of the getty's that know how to start both fax and data services on the fax modem and either swap cables or dial it up if you need to log in on the serial port? I thought both hylafax and sendfax/vgetty could do that.

--
  Les Mikesell
   lesmikesell@xxxxxxxxx


_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux