Am 27.07.2008 um 14:51 schrieb Kai Schaetzl:
It seems I can't smarm monitor disks on RAID controllers? I tried on
several machines with two different controllers and on all I get
this when
starting up smartd:
Jul 27 14:36:43 c1 smartd[5944]: Opened configuration file
/etc/smartd.conf
Jul 27 14:36:43 c1 smartd[5944]: Configuration file /etc/smartd.conf
parsed.
Jul 27 14:36:43 c1 smartd[5944]: Device: /dev/sda, opened
Jul 27 14:36:43 c1 smartd[5944]: Device: /dev/sda, Bad IEC (SMART)
mode
page, err=4, skip device
Jul 27 14:36:43 c1 smartd[5944]: Unable to register SCSI device /dev/
sda
at line 32 of file /etc/smartd.conf
Jul 27 14:36:43 c1 smartd[5944]: Device /dev/sda not available
/dev/sda is the virtual disk as it appears to CentOS as I can access
it
with hdparm.
Do I need to use another device for the RAID array (which?) or is it
impossible to smart monitor "thru" a RAID controller?
What controller would that be?
Rainer
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
