Hi All,
I have a CentOS5.2 server using a Qlogic QLE220 HBA, connected to
Quantum DX30 and M1800 libraries via a Qlogic SANbox 5600 switch. I've
installed the latest (v8.02.14) drivers from Qlogic for the HBA
The issue I have is I am missing 2 of the 4 SDLT drives provided by the
M1800 Library. The DX30 provides 6 drives, which are listed in dmesg
and assigned /dev/st0->5. I would expect the SDLT's to be st6->10 but I
only see up to st7 and dmesg only lists 2
Using the QLoigic SAN Surfer software all the LUN's/devices are visible
to the host.
FYI, I also have an old Sun220R connected to this same switch with a
qlogic card; Solaris 9 has no trouble seeing all LUNs and devices.
I've "googled" for a fair while and have not see anything that helps. My
FC knowledge on CentOS is limited so any help with troubleshooting this
would be greatly appreciated.
TIA
Dan
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
