Re: preferred software RAID 10?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



John R Pierce wrote:
Rudi Ahlers wrote:
And then, how do I setup the partitioning? Do I setup /boot on a separate RAID "partition"? If so, what happens if I want to replace the 1st 2 HDD's with bigger ones?


each partition is raided seperately with mdadm.... you could make the whole thing one LVM partition thats raid10, then use LVM to dice it up into file systems.

if you have 4 drives and are doing software raid10, you won't be swapping drives with different sizes without a WHOLE lotta pain.
Ok, so how do I do this? Let's say I have 4x 160GB HDD's now, and plan on replacing them with 4x 500GB HDD's in the future?

What setup would help with a upgrade in the future?

/boot shouldn't be mirrored, as the BIOS won't know how to boot it. leave /dev/sdb1 the same size as /dev/sda1 and call it /boot2 and try to remember to copy /boot to /boot2 each time you update the kernel.
I understand this, but how do you boot from /boot2 on the second HDD if the 1st have failed?

--

Kind Regards
Rudi Ahlers

Check out my technical blog, http://blog.softdux.com for Linux or other technical stuff

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux