Re: pci-x v2 detect on command line

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On Monday 14 July 2008, Tony Schreiner wrote:
> On Jul 14, 2008, at 12:28 PM, Bo Lynch wrote:
> > On Mon, July 14, 2008 11:43 am, Tony Schreiner wrote:
> >> Is there a way to tell from the OS whether the PCI-X bus is version 2
> >> or not?

You basically have two ways to go. 1) Google the PCI bridge 2) run lspci with 
a few -v options and attempt to decode the output.

The first approach would have told you that the AMD bridge does indeed support 
PCI-X version 2 but only to 266 MHz (assuming the board/bios etc. supports 
it). The cheap intel chip you mentioned below wont even likely run 133 MHz 
version 1 very fast...

But at this point it's probably relevant to ask why do you care? I have seen 
many high performance PCI, PCI-X and PCI-express cards but PCI-X-2? ...that 
hasn't seen any wide use at all. Do you really have a card that is PCI-X-2? 
As I understand it it's quite dead in the water and everyone has moved on to 
PCI-express.

/Peter

Attachment: signature.asc
Description: This is a digitally signed message part.

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux