Re: tape drive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



yes,

when the computer reboots, i saw the tape drive as device detected. but i can not use it when i log on

--- En date de : Ven 11.7.08, nate <centos@xxxxxxxxxxxxxxxx> a écrit :

De: nate <centos@xxxxxxxxxxxxxxxx>
Objet: Re: tape drive
À: centos@xxxxxxxxxx
Date: Vendredi 11 Juillet 2008, 7h51

Pitshou Asingalembi wrote:
> cat /proc/scsi/scsi gave me only the HDD, the st module was loaded by
typing
> modprobe st  but i don't have the st file under /dev.

Doesn't matter if the st module is loaded or not. If it's a SCSI
tape drive, and if it's connected to your SCSI controller, and if
the SCSI driver for your SCSI controller is loaded, the tape drive
will show up as a SCSI device.

Does your SCSI controller have a BIOS? Does the tape drive show
up in the SCSI bios?

nate

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos


Envoyé avec Yahoo! Mail.
Une boite mail plus intelligente.
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux