on 6-19-2008 11:42 AM Raja Subramanian spake the following:
LVM initialization is fairly early in the init. It is probably running long before your iscsi connector is starting. Maybe you could try moving its startup earlier?Hi All, My CentOS 5.1 server is using iSCSI attached disks connecting to a dual controller storage array. I have also configured multipathd to manage the multiple paths. Everything works well, and on boot the dev nodes are automatically created in /dev/mapper. On these devices, I have created logical volumes using lvm2. My problem is that lvm does not recognize these iscsi/multipath volumes on boot up. I need to manually run "vgchange -ay" and mount the logical volumes by hand. I tried running the vgchange and mount commands from /etc/rc.local, but that has no effect. I have verified that /etc/rc.local itself is executing correctly. What do I need to put in my boot up scripts so logical volumes in iscsi/multipathd devices are automatically recognized on boot? TIA! - Raja
-- MailScanner is like deodorant... You hope everybody uses it, and you notice quickly if they don't!!!!
Attachment:
signature.asc
Description: OpenPGP digital signature
_______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx http://lists.centos.org/mailman/listinfo/centos
