Hi all,
I'm sure this eventually will be resolved with a BIOS or kernel update,
but in case someone experiences this on this or a similar motherboard, I
thought I'd post a problem-and-workaround report.
Platform CentOS5, x86_64 kernel-2.6.18-53.1.21.el5
Motherboard Asus M3a78-EMH HDMI
SATA-controller configured as AHCI
Experienced symptom; Periodic, ~20s lockups/freezes, several a day, in
conjunction with disk (SATA) I/O. Kernel logs something like this;
ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2 frozen
ata3.00: cmd 61/08:00:71:18:7d/00:00:02:00:00/40 tag 0 cdb 0x0 data 4096 out
res 40/00:00:00:4f:c2/00:00:00:4f:c2/00 Emask 0x4 (timeout)
ata3: soft resetting port
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: configured for UDMA/133
ata3: EH complete
SCSI device sdc: 234441648 512-byte hdwr sectors (120034 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: drive cache: write back
(on a side note, the system has 6 SATA disks, the older ST3120827AS
Seagate-disk here exhibits this significantly more often than the
others, but they too are affected)
From other sources this is reported as a AHCI NCQ bug.
My workaround, which was suggested somewhere else, was to disable NCQ;
(in rc.local)
for D in sd{a,b,c,d,e,f} ; do
echo 1 > /sys/block/$a/device/queue_depth
done
This resolves the above issue, and from several times an hour, I have
not experienced it since (~30h).
Yours,
-S
--
Simen Thoresen, Dolphin ICS
Systems Administration and Wulfkit Support
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
