Re: Convert a real system in a DomU

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



2008/5/16 Luke S Crawford <lsc@xxxxxxxxx>:
> "Sergio Belkin" <sebelk@xxxxxxxxx> writes:
>> dd if=/dev/sdaX of=fedora6.img (on FC6)
>
> of course, you can't do this if you are booting off /dev/sdaX-  boot
> into a rescue disk or something.
>
>> and then on Centos 5.1
>>
>> dd if=fedora6.img of=/dev/sdaX
>>
>> Could I run this system into Xen?
>
> assuming you sized things correctly, yes.
>
> Personally I find it easier to just make .tar.gz files of the entire system.
>
> A few things you need to do to the fc image before you start.
>
> you want to install the xen kernel and make an entry for it in PyGrub
> before you move to step 1.   fix the /etc/fstab to match what you call your
> disks in the xm config file.   make sure the initrd you make has
> --preload xenblk
>
> make sure you run a getty on the console (for CentOS, the console is xvc0
> I assume it is the same for fc)   so add xvc0 to /etc/securetty and run
> a getty on it in /etc/inittab
>
> after this you can make the image as above.
>
> your config file needs to be something like this:
> bootloader = "/usr/bin/pygrub"
> memory = 512
> name = "fc_test"
> vif = []
> disk = [
>        'phy:/dev/sdaX,sda,w'
> ]
>

Thanks Luke, and what should in order to convert real partitions in
virtual disks?

Thanks in advance!
-- 
--
Open Kairos http://www.openkairos.com
Watch More TV http://sebelk.blogspot.com
Sergio Belkin -
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux