Hi list,
kernel-xen-2.6.18-53.1.14.el5 and
kernel-xen-2.6.18-53.1.19.el5
do not detect/initialize/whatever my eth1 network card any more.
With
kernel-xen-2.6.18-53.1.13.el5
everything is working as expected.
With the two recent kernels I only get an Interface named __tmp786686833
which is not added to xenbr...
lspci -v to the adapter in question says
02:00.0 Ethernet controller: Intel Corporation 82572EI Gigabit Ethernet
Controller (Copper) (rev 06)
Subsystem: Intel Corporation PRO/1000 PT Desktop Adapter
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at febe0000 (32-bit, non-prefetchable) [size=128K]
Memory at febc0000 (32-bit, non-prefetchable) [size=128K]
I/O ports at ec00 [size=32]
Expansion ROM at feba0000 [disabled] [size=128K]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Capabilities: [e0] Express Endpoint IRQ 0
ip link says
2: __tmp786686833: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
link/ether 00:1b:21:0e:a9:3b brd ff:ff:ff:ff:ff:ff
In modprobe.conf I have
alias eth1 e1000
for the adapter in question. The module itself is loaded.
Any Ideas how to fix this?
cheers
Henry
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
