On Wed, May 14, 2008 at 7:17 AM, <centos@xxxxxxxxxxxxxxx> wrote:
> H,
>
> I have 5.1. The other day I was printing and the job crashed. I cleaned
> the /var/spool/cups, but I am still getting the:
>
> network 192.168.2.10 host is busy, will retry in 30sec
>
> It's a dlink print server, that has worked very well for the last 3 years.
> I have restarted but the print server and the printer.
>
> Any suggestion?
>
I used to see problems like this with my local (lp0) laser printer if
I turned the printer off in the middle of a job (to clear the
printer), but the only fix I've found or heard of was to reboot the
machine. Nothing else I tried would resync the printer to the
computer, and this was a local parallel port.
IIRC, it not only required a reboot, but it hard to be a hard reset
(the switch) and not just a system restart because the hardware got
out of sync and there's no way to initiate a hard reset to the printer
from the software.
Has this changed, by any chance?
mhr
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
